How to replace antenna motor on Mazda Tribute 2003

SOURCE: 2002 Mazda Tribute rear liftgate lock replacement

I'm not sure where' the screws are but basically You need to remove the panel on the rear door, then once the panel (interior trim) has been removed you should see a lock mechanism which will be screwed/bolted in place. Easier and cheaper then buying a brand new lock mechanism (unless you want to buy brand new) is going to a wreckers and finding your car model and get it that way (yes it's used but it'll probably save you tons of money vs the dealership) Best Regards.

SOURCE: How to remove rear wiper arm on 2003 Mazda

lift the arm outward and a tab will show at the base of the arm. Pull it outward (the tab) and simply pull the arm away from the mounting stud

SOURCE: 2001 Mazda Tribute (3.0 L) Heater motor functions on high only

Its the Blower Resistor....If it was the switch, it probably wouldn't work at all....But the Resistor will give you those symptoms, of working on high med or low

SOURCE: 2003 Mazda Tribute will start, idle rough for a

check the fuel filter air filter and vacuume lines if they all good make sure the spark plugs are making a bright blue spark

SOURCE: I need a serpentine belt diagram for a 2003 mazda

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/2003/make/mazda/model/tribute/2003_mazda_tribute_drive_belt_routing_diagram.htm