SOURCE: Need torque spec for 2000 Cirrus outer tie rod ends
45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock nut
SOURCE: torque spec's: 75 nova steering components
I looked in an old Motor book, competitor to Chilton, and it gives no special torques or instructions for front end parts. It just says tighten.From experience I always tightened them with a 3/8 socket wrench until they stopped turning using just my arm strength. Never loosen to put in a cotter pin. Hope this helps.
Testimonial: "75 nova dude: problem solved THANKS!! to hippycy"
SOURCE: Torque specs for outer tie rod end connected to knuckle on a 2007 Honda Pilot and for jam nut?
40 foot lb for tie rod to knuckle
55 foot lb for jamb nut
3,223 views
Usually answered in minutes!
×