2000 landrover discovery II ABS light, tracking light are on

fuse blows means the load on that fuse is shorted out.
AKA.( POWER FEED OVERLOADED)<<< PHYSICS
the service manual shows all thingS connected to any fuse
the scan tool must be used, to find all DTC even ABS
the brakes most be good or ABS has no chance to work.

no year car told
nor country sold to (VIN)
first td5 is 1998. with ABS THEN,. AND ENDED 2007 .td5 only.
NO DISCOVERY HERE USA SO NO BOOKS ON IT
3 Generations there are , series II 1998 first. and with ABS.
mot fails in generic parlance is SMOG tests fails, that every one understands.
sure fail how can it not with all that bad.

next time post full name of fuses and its exact location and slot..
the others in EUROPE:? can help tell you what is connected to that fuse. and Amps of fuse blown.

and why skip year , seen in the VIN tag etc?
year of mfg.

-Check fuse and buld.

mai Lor

Follow the old one 'out' with the new one 'in'.

there is a short in system is the abs or brake light on if bothe are on you may have a shorted wheel speed sensor

go to dealer to plug the testbook in

dealer

Suggests either Wheel Bearing, ABS Sensor Fault, or Shuttle valve. Best to get it to a dealer and on the computer for them to diagnose what exactly is wrong.

That is a AC compressor problem.
It may be no compressor oil in that compressor

broken wire or dry connection/rusty connection at the light possibly

Stage 1 20nm
Stage 2 +90 degrees
Stage 3 +90 degrees