Http://www.fixya.com/cars/t26626878-ctv_transmission_drives_in_reverse
Here is a previous answer from fixya.
SOURCE: i have a honda 2000 cr-v AWD with transmission issues
First thing - Check the mechanical linkage between the shift lever and the transmission itself to make sure it is still connected.
SOURCE: My reverse went out but only go forward!
Arthur,
Shouldnt be a big deal.
Your shift linkage is probably bent.
You will need to go to a trans shop and get it fixed.
I highly recommend AAMCO since they warranty their work. They will have to "unbend" the bracket or readjust the cable play, or repair the linkage that places the car in the proper gear according to your indicator on steering column or dash.
Not a big deal...but then again you could have crushed the synchro gears, but i truly doubt it!
Thanks,
Mark
SOURCE: no reverse after rebuild on 4L60E Transmission from 1995 GMC Sono
There isn't a modulator on this trans as it is electronic
You can have first gear going forwrd but no reverse. It is possible. The low/ reverse clutch isn't needed to go forward.
SOURCE: 2001 Ford E250 transmission has no reverse gear,
I would check the shifter and the linkage. Even though the shifter lever is moving, that doesn't mean it's moving the linkage on the transmission.
SOURCE: jeep 2008 patriot esp light on Malfunction
Check under drivers door sill step. There is a spice I believe the wires are red or pink in color. The splice will be wrapped in black hockey tape looking stuff. Peel the the hockey tape stuff off and you will find that this splice is corroded and not making contact anymore. You can repair this splice and your problems will be fixed. Be sure to use some good heat shrink on your repair to prevent from happening again.
1,077 views
Usually answered in minutes!
×