Cars & Trucks Logo

Related Topics:

e
ed rosen Posted on May 23, 2017

Passenger side low beam does not work. high beam is fine. I just changed the low beam bulb

This is for a 2006 misubishi lancer

5 Related Answers

Anonymous

  • 651 Answers
  • Posted on Dec 01, 2008

SOURCE: low beams don't work

i would check that tail light and make sure there are no wires touching each other. sounds like a deffinant short some where.

Ad

Anonymous

  • 1 Answer
  • Posted on Feb 11, 2009

SOURCE: 2003 sunfire wiring

I have a 2003 subnfire and my battery drain every night.
found out that my radio the monsoon 8 speaker system with the amp was the cause it even cause Dash lights to work and not to work. pulled stereo and amp no problem now. solved problem

Anonymous

  • 334 Answers
  • Posted on Dec 31, 2009

SOURCE: fog lights and high beams work, but not the low beams

most likely the hi lo switch

Anonymous

  • 1 Answer
  • Posted on Jun 10, 2010

SOURCE: Audi A4 2002 Low beams & Right front turn signal stopped working

but on 2002 A4, F20 and F21 are empty! Does anyone has an idea where the headlight fuses located?

Anonymous

  • 12 Answers
  • Posted on Mar 28, 2013

SOURCE: My low beam headlights won't work but high beams work fine. I changed the bulbs and it still doesn't work

High beam switch moat likely, have you checked relays and fuses?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

1987 Nissan 300zx non turbo Headlight problem

Look for a poor ground connection on the affected bulb socket.
0helpful
1answer

Low beam on right side of 2006 dodge ram 1500 doesn't work

the high beams work fine and power goes to the only when vehicle is on when it is off no power gets to the low beam side of the right headlight. ????????
0helpful
2answers

Dodge ram 3500 turn signal - headlight problem

WAY TO GO !!! another "great idea" from vehicle manufactures
0helpful
1answer

How do I adjust the low beam headlght on a 2006 Sabaru Tribecca B9

I have a similar problem. The adjustment screw adjusts both the high and lof beams. After changing the passenger side low beam, both sides then pointed at the ground. High beams were fine. I adjusted so the low beams are fine but now the high beams point straight up.

In talking with Subaru Service he said there is a "module". He said after changing the bulbs they should point down then auto-adjust back up. That didn't happen. I haven't found anything on such a module. He said it woul be $109 for adjusting the lights OR for the module.

If I find anything more I'll let you know.
1helpful
1answer

2006 Honda CRV Passenger both Low & High beams out (bulbs good)

Well I suspect that you may have developed a problem in what's called the Multiplex unit. It's an integral part of the fuse box in Honda CR-V's. It's possible that the cargo trailer caused the problem by causing too much current to be drawn thru the system, I have a similar problem with my 2002 Honda CR-V and have been told I need to replace the multiplex unit and they are quite expensive. You may have to bite the bullet and have it checked by your nearest Honda Dealer.
0helpful
1answer

Low beams don't work

i would check that tail light and make sure there are no wires touching each other. sounds like a deffinant short some where.
Not finding what you are looking for?

52 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...