Cars & Trucks Logo

Related Topics:

C
Colbert Posted on Mar 29, 2017

Plaes ineed ford ka 2007 mdell spoiler - Ka Ford Cars & Trucks

1 Related Answer

Anonymous

  • 28 Answers
  • Posted on Nov 17, 2008

SOURCE: ford ka rear spoiler

You need to look on under side of spoiler, and match studs. (two way threaded bolts) to the wholes. after that mark where the stud wholes need to go through the trunk then drill wholes a 16th bigger than the studs. After drilling wholes through the trunk get sillicone sealer around wholes. Install spoiler and install bolts on the underside of your trunk.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Ford ka 2007 radio showing locked and a single number 3 under it how do I unlock it and also I tried holding 1 and 6 in together and it come up with these

don't hold on together.. change channel and hold it on on any number..
u can also find reset option or a reverse arrow mark which is same thing as reset.
or just get a guide from here https://www.reliable-store.com/
1helpful
1answer

I have a 2007 Infiniti G35s sedan. I installed an OEM spoiler & spliced the spoiler wires to the 3rd brake light wires. Non of the brake lights work now including the 3rd & spoiler. What did I do?!...

Sounds like you have lost ground somewhere along the way. might try running a ground from spoiler to frame or simply replacing wires back to original and trying again. Would put my money on a ground wire. good luck
9helpful
3answers

How do you take off 2004 Ford Taurus rear spoiler wings?

You'll need to open the trunk and remove the trim along the top of the trunk. The trim will be secured by some screws that should be along the perimeter of the trim. Once the screws are out, gently pop the trim off (there will be retaining clips that you don't want to break) and then you can access the bolts securing the spoiler onto the trunk. If you plan to not use a spoiler, you will need to find something to plug up the holes to prevent water and dust from getting into the trunk.
0helpful
1answer

Hi, how would i fit a ford ka 08 heater matrix?

i would not bother just sell it and get a nice car lol ford ka for god sake
1helpful
1answer

2007 Corolla S, Spoiler break lights out

you will find the complete lamp needs to be replaced it usually is screwed in from the front of the rear spoiler but differs from spoiler to spoiler
0helpful
1answer

Attaching a genuine Lancia rear Evo spoiler to a Lancia Integrale

place the spoiler in the aria you want to fit it and make measurements, so they equal either side mark with a wipeable pen. and then measure the boot edge to where the spoiler is so its straight. check twice the drill the holes out using the the plate of the spoiler for the markings, check twice then drill measure twice. should fit right and look right.
0helpful
1answer

Ford ka window switches not working

Check for loose wiring connections behind the door panel on the offending side.
0helpful
1answer

Ford ka rear spoiler

You need to look on under side of spoiler, and match studs. (two way threaded bolts) to the wholes. after that mark where the stud wholes need to go through the trunk then drill wholes a 16th bigger than the studs. After drilling wholes through the trunk get sillicone sealer around wholes. Install spoiler and install bolts on the underside of your trunk.
Not finding what you are looking for?

44 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...