I changed the brakes and censors on my X5, the rear sensor was gone just the wire, so I replaced both. put it back together but the brake light indicator is still on. not abs or parking brake in between lit up in red BRAKE. How do I get this light to turn off?
Check the break fluid level.
SOURCE: Brake Pad Sensor
i have replaced both front/ rear pads, and no matter what the dash light will not go off. I have disconnected both front/rear sensors, and light is still on , any suggestions?
SOURCE: Brake lights wnt wrk when pushing dwn brake, but park lights do
As cadman mention to check the fuse, and if there ok check your brake light switch along the brake peddle arm. Before you doany of that, turn your hazard light on to make sure that all your light's are not burnt out. Good luck
SOURCE: Dash board parking brake and ABS lights stay
you have an abs fault. have your abs system scanned for codes.
your base brakes will continue to function normally
my cigarette lighter doesn't work in the front or the back...how can i fix this? i need it to charge my cell and GPS...=/
SOURCE: how do I RESET BRAKE LIGHT ON 2006 BMW 325I.Brake
that has to be done by a dealership with a BMW specifiic scan tool
634 views
Usually answered in minutes!
×