Question about 2003 Hyundai Elantra
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is a short or a signal from the un-locking switch that is triggering your locks.
you have a switch manually to lock and un-lock your doors, the unlocking circuit is making contact.
you can try playing with your switch to un-short the switch or open it up ang check it.
tnx 4 using fixya,
Posted on Sep 26, 2008
Please dont worry yourself so much the security locks needs to be reprogrammed to enable it work effectively. Same happens to other vehicles as well.
Consult Hyundai garage close to you or if you have it in your manual.
Posted on Apr 14, 2009
I had this problem. Through some research and asking some service personnel I found out it is a fairly easy fix. You will need to buy a new relay switch for the door locks. The dealer will/should know what you need. They are located (two of them, buy two and replace both) on the back side of the fuse box. It is not that easy to get back there. I had to lay on my back with my head up under the instrument panel. They are visible and can be removed if you take some time and be careful. Once I knew what I was looking at, it was easy to replace and the remote works like a charm. You can go to an auto supply, like Autozone, and they should have a schematic to show you where these relays are.
Posted on Jun 03, 2009
you have two relays on the interior fuse block one for locking and one for unlocking. Swap them and see if the problem is now such that they will not lock. If so you have your answer.
Posted on Aug 30, 2009
Tips for a great answer:
Jan 02, 2017 | Hyundai Motor 2003 Elantra
Jan 04, 2016 | Hyundai Cars & Trucks
Jun 25, 2014 | 2001 Hyundai Elantra
Apr 09, 2011 | Hyundai Motor 2003 Elantra
Same thing happened with mine. It turned out that the
power door lock motor went out. Since the handle or the switch can unlock the
driver's door, both of these mechanisms are connected. When the door lock motor
goes out it freezes in whatever position, it was last engaged.
Nov 06, 2010 | Hyundai Motor 2002 Elantra
Jun 06, 2010 | Hyundai Motor 2003 Elantra
Oct 10, 2009 | 1997 Hyundai Elantra
Apr 07, 2009 | Hyundai Motor 2003 Elantra
Sep 26, 2008 | 2001 Hyundai Elantra
132 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: