MY MOON ROOF IS STUCK. IT WONT CLOSE ALL THE WAY AND IT WONT OPEN ALL THE WAY. I GET IT TO CLOSE ABOUT AN INCH FROM ALL THE WAY THEN IT STOPS AND ROLLS BACK. BUT ONLY HALF WAY BACK LEAVING ONLY HAVE THE ROOF OPEN. I JUST NEED TO KNOW HOW TO FIX THE DANG MOON ROOF!!!
Here's a description the sun roof
Power Sunroof System Components
The power sunroof system consists of the following components:
• Sunroof module
• Sunroof switch
• Sunroof motor, with 2 hall effect sensors and limit switch
• Sunroof window
• Sunroof sunshade panel
• Power supply for the sunroof module: RAP 25 A
• Ground G402
Override
The override function is used when needing to force a closing of the sunroof window. To override the system:
Turn ignition to ON.
Rotate the sunroof switch to the close position.
Press upward.
The sunroof switch data 6 circuit, or override circuit, will become grounded at the sunroof module. As long as the sunroof module sees this input, it will continue to slide the sunroof window to close, regardless of the other sunroof switch data circuits inputs.
Anti-Trap Guard
If an object is in the way of the sunroof glass while closing, the sunroof glass will stop and depending on the position of the sunroof glass, it will reverse back open to a preset factory position.
To temporarily disable the anti-pinch guard, utilize the override function. Turn the sunroof switch to the close position and press upward. This will override the system, allowing the sunroof window to continue to close. Once the switch is released the anti-pinch feature is enabled.
×
428 views
Usually answered in minutes!
×