My CD won't play CD 2006 canyon

Kirk, I am not aware of any fuse to remove to make player work. Try cleaning the lazer/head. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
CD player doesn read disc
2007 Sonata Ltd CD player won read discs
How to Fix Car CD Player

Most modern cars have a security code enable for the installed radio/cd players. This is an anti-theft device.

The initial documents given to the owner when the vehicle was purchased lists this code and how to reset it.

If you are second owner/original owner who has lost this information, then, you can approach gmc canyon dealer and they will have this code on their server. Normally a free service (I believe).

The security code is lost from the radio whenever keep alive voltage is removed from the radio. i.e. You disconnected or replace the battery.

I hope this helps.

Ok tell me this is the pedal stuck all the down on the e-brake. If so if you look under the dash on the e-brake follow the pedal and you can see where it locks and all yo have to do is press pedal and with a screw driver release lock on the pedal. Good luck

http://parts.nalleygmc.com/showAssembly.aspx?ukey_assembly=392045&ukey_product=2577448

Hey fredline,- thanks for your help. With these steps it works perfect! I had these problems with my 2005 Canyon, and now with your posting anything runs well!!! Thanks a lot.

Andy (Germany)

Put those code into google for description & fix

OBD2 PO300 etc

You can print code charts also

Codes won't tell you what is wrong,the web sites may

Codes don't tell you to change anything,you have to know
how to component test,doubt you will find that,need factory
manuals

Helm.Com for manuals

Two of codes are not generic-- so thus the internet search

The PO300 is random cylinder misfires,no value by it'self

Check to see if something is jammed in it

Soo easy just keep playing with it keep pressing the button the same thing happend with my mom and i got it out the way i told you.,DO IT WHEN YOU CAN!! :)

Is it a burned CD-R? I know (this is probably the same on a 2006) that on my 2005 if you put one in, it will play fine then lock the disc in. There is a fuse pannel on the passenger side on the center of the console towards the front of the car. Just pull the plastic cover off. Find the 10A fuse by the little grey box, and a blue and white circle. (or just look for the fuse labled "RADIO" on the map inside the plastic cover and then locate it in the fuse box). Turn the key off, pull the fuse, turn the key back on for a sec and the radio will not come on. turn the key off, put the fuse back in and turn the key on. the disc should either come out or you will have to push eject. This may or may not work, some people say it doesn't work for them. (this may reset the radio number buttons memory). Hope this helps!

Subject: Radio With Six Disc CD Changer Does Not Recognize Loaded CD And Displays An "INITIALIZING" Message, CD Will Not Play, CD Cannot Be Ejected, Or Disc Icon Does Not Illuminate (Reprogram Radio)
Models:
2005-2006 Chevrolet Avalanche, Suburban, Tahoe
2005-2007 Chevrolet Colorado, Express, Silverado Classic, TrailBlazer
2005-2006 GMC Yukon, Yukon XL
2005-2007 GMC Canyon, Envoy, Savana, Sierra Classic
2005-2006 HUMMER H2 with Six Disc CD Changer Equipped Audio System (RPO UC6)
Condition
Some customers may comment on any of the following conditions:
• The CD loaded in the radio will not play.
• The CD loaded in the radio will not eject.
• The disc icon on the radio will not illuminate.
• The radio displays an "INITIALIZING" message for approximately 30 seconds after vehicle start up.
Important: Do not attempt to play CDs with paper labels on them in this CD player. The labels may warp or wrinkle and jam the CD player mechanism. Refer to the Compact Disc Care and Cleaning procedure (Document ID# 1656123) in SI for more information.
Technicians are to reprogram the radio with new operating software using the following procedure:
1. If the radio has a CD(s)2008 General will be necessary to reset the radio and remove them
before the radio is reprogrammed. Remove and reinstall the radio fuse to reset the radio and then eject the CD(s). If cycling the power to the radio does not allow the CD(s) to be removed, the radio may have another failure that will not be corrected by the reprogramming procedure that follows. Refer to the Diagnostic Starting Point - Entertainment procedure in SI to begin your diagnosis of this failure to eject CDs concern before reprogramming the radio.
2. Reprogram the radio using the Service Programming System (SPS) with the latest software available on TIS2WEB. Refer to the SPS procedures and the Radio Programming and Set procedure in SI for more information. As always make sure your Tech 2® is updated with the latest software version.
3. Verify proper operation of the radio and make sure that all CDs can be ejected.

Hope helps (remember to rate this).

i pretty sure you go through the back right above the bumper and below the tail gate there should be a hole, and your truck should come with the tools u need ( probably with your jack) anyways you put the rod in there and unwind it.