How do I reset the keypad if I don't have the factory code

Unhook the battery for a few minutes and then put in the original code from the factory and then within a few seconds you can reprogram the code to whatever you want it to be,good luck .Don .

Each vehicle equipped with a keyless entry keypad is programmed with a five-digit entry code. This code is provided to the customer through a wallet card in the owner literature package. In addition, this code is available through a diagnostic tool and is also printed on the vehicle security module label. When entering codes each digit mst be entered within five seconds of the previous button press.

Do you know the original five-digit code ? You need the original to reset with a new one .

Programming/Erasing Personal Code
A unique personal five-digit code can be programmed by following these steps:

1. Enter the factory set five-digit code (the keypad will illuminate when pressed).

1. Press 1/2 within five seconds of Step 1.

1. Enter the unique five-digit code.

The personal code does not substitute for the permanent factory set code. Either code can be used to access the vehicle. In addition, if a second personal code is programmed, it overwrites the previous personal code. To erase a personal code, carry out the following procedure:

1. Enter factory set five-digit code.

1. Press 1/2 within five seconds of Step 1.

1. Press 7/8 and 9/0 at the same time within five seconds of Step 2.

The system now responds only to the factory set code.
If you do not know the code ,it is located on the vehicle security module located under the dash some where or in the trunk . Sorry I can't be more specific ,my service info doesn't show sable .

Ouch. Talk to them! In mine the only way is to change a code chip.

You don't have to pay a dealer anything

You do have to go there to get the factory
code,then you can change to whatever you want,
if you have an owners manual or they write it down
for you

Not a reset code,just a security code

Follow the instructions in your owners manual, but you must have the original code, if you don't the code is on the keyless entry module. If you do not have an owners manual you can download one HERE.

Sorry,but the factory code always works.Ford may be able to change it,though. don-ohio

You have to have the factory code to progam a new code in one code is perminantly programed the sedond code can be entered after the original code is put in. by following these steps

1. Enter the factory set code. Note: The keypad and the interior lamps

will illuminate when pressed.

2. Within five seconds press 1 • 2 on the keypad to enter the

programming mode.

3. Enter your personal 5-digit code. Each number must be entered

within five seconds of each other.

4. Press 1 • 2 to store the first personal code.

5. The doors will lock then unlock to confirm programming of the new

code.

To store a second personal code:

1. Enter the factory set code.

2. Within five seconds press 1 • 2 on the keypad to enter the

programming mode.

3. Enter a second personal 5-digit code. Each number must be entered

within five seconds of each other.

If you dont have the original code you will have to find a factory scanner to retrieve the code some places will do this for free others charge. The code cn usually be found in the owners manual on a card.... if not to the dealership is where you will have to go

KEYLESS ENTRY SYSTEM You can use the keyless entry keypad to:• lock or unlock the doors without using a key.• open the trunk.• recall memory seat/mirrors/steering column/adjustable pedals positions1 or 2. The keypad can be operated with the factory set 5-digit entry code; this code is located on the owner's wallet card in the glove box, is marked on the computer module, and is available from your authorized dealer. You can also create your own 5-digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation. Programming a personal entry code. To create your own personal entry code: 1. Enter the factory set code. 2. Within five seconds press the 1 • 2 on the keypad. Note: The lock motors will cycle, locked then unlocked 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. Enter a sixth digit to indicate which personality feature should be recalled by the personal code. Note: The lock motors will cycle, locked then unlocked. • 1 • 2 recalls driver personality 1. • 3 • 4 recalls driver personality 2. • 9 • 0 does not recall a driver personality. Wait 5 seconds without pressing a keypad button in order to store a personal entry code. Tips: • Do not set a code that uses five of the same number. • Do not use five numbers in sequential order. • The factory set code will work even if you have set your own personal code. • If you set a personal code and store it over an existing personal code it will erase that personal code only. Erasing personal code 1. Enter the factory set 5-digit code. 2. Press and hold the 1 • 2 for two seconds and release; this must be done within five seconds of completing step 1. 3. Press and hold the 1 • 2 for two seconds to erase the customer programmed code; this must be done within five seconds of completing step 2. Your personal code is now erased and only the factory set 5-digit code will work.

For "delete" your personal code, first be sure that you have the factory keypad code...

1. Enter the factory set 5-digit code.
2. Within five seconds, press the 1 - 2 on the keypad and release.
3. Press and hold the 1 - 2 for two seconds. This must be done within five seconds of completing Step 2

All personal codes are now erased and only the factory set 5-digit code will work.

Hope this help (remember comment and rated this help).

No this is a safety issue because if you could make your own code without the factory code then anyone could make their own code for your vehicle and break in. You should go back to the dealer and have them reset the code for you.