At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I got a 1998 BMW 740IL
I CHANGE THE IGNITION SWITCH ASSEMBLY. THE CAR DON'T WANT TO START WITH THE NEW KEY.THE LIGHTS IN THE BOARD TURN ON .PLEASE HELP ME OUT.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
you should take it to the place where you got the new ignition key programmed - and ask them what to do next, and why they charged you for a non-functional key.
Check with the dealer to see if that model car has a chip in the key. If it does then the new key wont work because it does not have the chip or the chip is not set right.
Programming When Key batteries completely discharged. Key batteries not replaced within 60 seconds. Key added or replaced. DO NOT press remote control buttons during battery replacement. How Unlock vehicle. Enter vehicle. Close driver's door. Switch ignition ON and OFF. Remove ignition key. Press and hold unlock button Fig. 1 [1]. Press lock button Fig. 1 [2] briefly 3 times within 10 seconds keeping unlock button [1] depressed. Release unlock button Fig. 1 [1]. Some models: LED Fig. 1 [3] flashes slowly for 10 seconds. Some models: Central locking system locks and unlocks rapidly to indicate correct programming. Some models: Repeat above procedure if central locking system does not work and LED does not flash or LED flashes continuously
To change batteries remove panel back of key then screws on plastic bar
Batteries are available from your local motor factor shop
You might not need new batteries try re programing as described above
check battery cables.make sure they are not loose are or corroded.if battery cables okay.problem could be faulty starter - electronic immobilizer control - ignition switch + check its fuse first.if you disconnect battery cables besure to turn off radio so you wont lose code.
If you checked all the fuses try putting the car in neutral sometimes the shifter gets misadjusted and wont start till the car is completely in park.If not check for a lose wire to the starter.If the car has an after market alarm you will have to turn it off before starting there should be a little buuton under the drivers dash or kick panel.GOOD LUCK
×