At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: Will 1995 half ton fit 1995 three quarter ton...
Gmc and chevy k1500 pickup and suburban years 95-99
k2500 pickup years 95-98
k2500 suburban 95-96
gmc k2500 and yukon 95-98
I hope that helps if so please rate my answer
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
What you need to understand here is that's how some gauges work its not the space shuttle it dosn't have to be .
The best way to figure it out is to first know how much the tank holds Drive it until its at half a tank according to the gauge then fill it up see how much fuel it takes so you can't put any more fuel in the tank.
You can do this same thing at any level 3/4 1/4 or E to see how much reserve fuel left after E
Likely nothing is wrong with the gauge..
Most likely they would indeed fit fine but you may need to swap out the drive shaft. Also, body adjustments for the transmission tunnel may need to be made.
Replace them both at the same time. You\'ll need a shop press to get the old bearings off and to push the new ones back on. There are 4 bolts on the bearing cover behind the flange that have the studs on it that holds on the wheel. Take them out then take off the cover on the rear end. There is a horse shoe clip that holds the axle shaft to the gears. Remove the clips and pull the axle out.
Unfortunately no, the 1994 Ford Explorer hood latch will not fit on a 1995 model. You need to find a latch from between the years of 1995 - 97.-------------------------------------------------------------------------------------------- autel maxidas ds708
Hi Cole, The speed sensor is a cylindrical piece of equipment that fits onto a retaining housing usually behind the brake assembly on each wheel. They are maybe two inches long and half to three quarters of an inch in diameter. They have electrical cables connections one end and magnetic coil pick ups on the other. Regards John
Fit an extra battery on the driver side its got a tray fitted already,just fit and run an earth lead and a positive lead.this will cure your problem.There is such a lot of electrics on the suburban that the battery ic drained and charged too often,its like your cell phone when you get it new it lasts for days and after a year it has to be charged every day.Hope this helps.
×