What do I need to do
Pre starter motor is getting stuck and will not turn on the key take off the starter motor blow out all the dust spay with WD40 and them grease the whole stem and shaft and put it back on the car should take you about 1 hour to complete if it still the same get another starter motor
SOURCE: Grinding sound and the car will not stay in gear.
hi,better to put your car in a car lifter,to determine the noise,if you suspected that your trans. create the noise,remove your trans. oil pan,now you can see,if there is a metal chip or like a fine dust, or quality of oil, mechanical parts are maybe defect,better to consult or evaluate your trans.by your dealer,ty
SOURCE: 1991 mercedes benz 190e carburator diagram
If it wont turn over try the neutral safety switch, if it wont start in neutral either the switch most likely needs to be replaced.
SOURCE: RE: 1991 Mercedes Benz 500SL...
Hi there. The reason it only leaks when you turn the car on is because the gas tank is pressurized, but only after the car has had a chance to pressurize the tank (when the car is turned on). To fix this, you need a new gas tank! Alex
SOURCE: merrcedes-benz 200 wiring diagram
E class merc ing barrel wiring as some one changed it and the wires come out the plastic housing at rear 1994 car
SOURCE: Where is the neutral safety switch on the 1995
driver side of the transmission . also check the connection between the switch and the rod. if its off the car wont start even if the switch is good , wont even make a sound.
47 views
Usually answered in minutes!
×