Chevy equinox brake system
SOURCE: transmission fluid in brake system
Your braking system will need to be flushed (all of the brake fluid completely removed) and refilled. If left in the braking system, the wrong fluid could end up ruining the brake calipers, brake master cylinder, rubber brake hoses, and other brake components – leading to brake failure.
SOURCE: "06 chevy equinox how to reset security system.
Take + terminal off the battery and leave it sit for 2-3 mins. This act's like a reset-to default factory settings...I had same problem on my 97 Z28, endeded up being the negative terminal to the battery was just slighly loose. I noticed it while disconnecting the the battery to reset my ob-cpu...Try this and let me know if it worked... i should!
SOURCE: i have a 2005 chevy equinox i replace the front
check the connections on the abs, behind the rotor by strut is the connection for the abs if the connector is loose or not properly affixed to the clip it sets off the abs trouble code or low speed saftey usually activates at slow speed under 5 miles an hour the connector and clip are part of the abs circuit--also recheck ur brake pads for binding and brake fluid level --if u get a trouble code have vehicle scanned some auo stores such as auto zone / advanced auto scan for free this will tell u which sensor or unit is causing problem
SOURCE: My 2006 Chevy equinox is making a clicking noise
wheel speed sensors, is the light staying on for ABS ?
SOURCE: 2004 Chevy Aveo The brake
check rotor and brake pads. also check fluid level. one of those 3 causing problems.
more and likely its the rotor. its cheaper to buy new ones for around 20-30 dollars.
warped rotor will cause the pedal to ..pulsate. and more and likely you pads are wore.
when getting new rotor always put new shoes on so the rotor it can wear evenly.
24 views
Usually answered in minutes!
×