2005 Infiniti G35 Logo
T
Tejinder Bhulllar Posted on Jul 26, 2014

Driver side day light not working. Bulb fine, also replaced with new bulb. Noted day light on /off on very hot day or with cold start. Now not working at all. Is it ballast or IPDM problem. pls help

Sedan. Rear wheel drive

1 Answer

myfagan

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 22 Answers
  • Posted on Aug 11, 2014
myfagan
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 23, 2009
Answers
22
Questions
0
Helped
6522
Points
24

Check fuse and relay

5 Related Answers

Anonymous

  • 203 Answers
  • Posted on Dec 05, 2008

SOURCE: Center Brake Light Not Working

sounds like the bulb change that first. joe

Ad

Anonymous

  • 1 Answer
  • Posted on Mar 12, 2009

SOURCE: My rear driver side window stopped working!

Sounds like it could be a short in your wiring. Or else it could be a fuse. Start there, check your fuses~~~

Brian

  • 6 Answers
  • Posted on Jul 12, 2009

SOURCE: how do I change the bulb 2004 infiniti high mount bake light?

Unfortunately, these are not very simple. If you have a factory high mount brake light-meaning not one in a spoiler, you have to remove the rear seats, the rear parcel shelf and then the 3rd brake light. the 3rd brake light I believe is an LED setup which get replaced as an assembly which inserts into the housing. If you need further guidance let me know.

Thanks,

Brian

Anonymous

  • 8 Answers
  • Posted on Nov 17, 2009

SOURCE: need to remove headlight 2003 infinity g35 sedan

yes ballast is on the bottom of the headlight capsule. remove and note 4 torx heads

dougbender51

  • 976 Answers
  • Posted on Apr 24, 2010

SOURCE: Hi, i was messing with the Click light bulb and i

you popped a fuse check them all it may not be labeled as one of the items that dont work

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Front side marker / turn signal wiring diagram for 1997 crown vic LX. Both directionals works, but parking light on driver side dosn't. passenger side works fine . 3157 bulb and only 2 wires to socket !...

Verify:
- the bulb socket are still wired soundly on the back side
- contacts inside socket are still intact.
- wires are not frayed/broken (entire length)
- the actual bulb is good
-all ground wires are soundly connected

3cf55e8d-23c8-4483-b9ba-2225f93e3a2a.jpg
1helpful
1answer

Passenger side reverse light bulb stays lit when lights are turned on. Replaced bulb but didn't solve problem?

Sometimes such a problem is because the ground wire for that light is bad, and so the electricity is feeding to ground through the back-up light.
Try to run a new ground wire from that light socket to the steel body ground.
Be blessed.
3helpful
3answers

Driver side break light will not work after replaceing the bulb a few times, tail light has no issue or the reverse light an blinker... any suggestions after replacing the bulb??

turn on 4 way flashes if that light is the same one,, start checking the ground wires and the way the bulbs fit in the sockets if the sockets are worn they wont hold the bulb right..if the ground is faulty the bulb will flash funny..good luck repost findings
0helpful
2answers

2002 Pontiac Montana. Front passenger side turn signal doesn't blink but the bulb is working as a running light. The faulty turn signal connection causes the right turn signal to blink excessively fast. Do...

Need to replace the bulb. There are 2 filaments in the bulb. 1 works parking light the other is turn signal. It flashes fast to alert you that it has a blown out bulb.
0helpful
1answer
0helpful
2answers

Driver side blinker won't blink

replace the drivers front bulb. There are 2 different elements in the bulb 1 for park lights 1 for directional
0helpful
1answer

03 pt ONLY driver brake light out

Ok you can't tell anyone, but I changed the wrong bulb. Only two choices and I changed the good bulb. ugh. all fixed now..
0helpful
1answer

Side signal driver side

What your describing sounds like incorrect bulb positioning. If the socket is not located correctly then water can enter the light housing and blow the bulb, sometimes in pieces. This is the only condition that a bulb blows to pieces, when a hot bulb meets water. If needed remove the entire lamp assembly to make sure it is properly located in the socket. Good luck.
Not finding what you are looking for?

120 views

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...