20 Most Recent 2005 Infiniti G35 Questions & Answers

Question edited for spelling, typos and Caps. Question moved to model category. Did you disconnect the battery to do the work? Did you reset the security and engine immobilizer? Did you check for Diagnostic Trouble Codes? Did you carefully check the valve timing and that the chain didn't skip teeth when the tensioner let go? ..

Question moved to model category. When you disconnect connectors under the dash, you are likely to cause issues with the anti theft system, when you disconnect the battery, you DEFINITELY do. Now you need to reset the security system. Is the anti theft light on solid? https://www.google.com/search?q=2005+infiniti+g35+reset+security+system Or you get an auto electrician to diagnose with a professional grade scan tool computer.https://www.google.com/search?q=auto+electrician+near+me..

Where is the fuel gauge fuse on an 06 Infiniti G35

Question edited for clarity, 'maker'. Question moved to Model Category. Videos that may help. It is a known issue. https://www.google.com/search?q=2005+Infiniti+G35+Coupe%2C+won%27t+go+into+manual+mode ..

Question edited for clarity. Question moved to sub category. Check out the video. https://www.google.com/search?q=2005+Infiniti+G35.+How+to+replace+fuel+tank ..

Seems a known issue. The usual advice is remove and refurbish. https://www.google.com/search?q=2005+Infiniti+G35+transmission+slips+when+it+warms+up ..

If the radio is not correctly working or does not start at all, check the following fuse: • In the passenger compartment fuse box - Fuse number 6 which is a 10 Amp fuse • In the engine compartment - check fuse box number one. In it, there will be fuse number 37, a 15 Amp fuse, replace it. To know more about all the fuses in your car and what each does, follow this link: https://knigaproavto.ru/shemy/en/infiniti/g-series/865-2002-2007-infiniti-g35-fuse-box-diagram.html

There are 3 fuse location. One next to your feet, second next to the battery and the 3rd one behind the battery.

1.Unplug your taillights at the sockets and the front running lights from sockets.
2. put in new fuse after unplugging taillights.
3 turn on taillights if fuse blows then the wiring is grounding out somewhere between the switch, fuse panel, and rear and or front parking lights.
4.If fuse does not blow then plug in one socket at a time keep rechecking fuse. when the fuse blows after plugging in a certain socket suspect that one to be bad and replace.

Haven't seen this very much on 2004's but on 03's There was a service bulletin issued on this. The bulletin directed the technician to perform an inspection of the Brake Control System. Most of the cars I ever saw with this issue had to have the VDC/TCS/ABS control unit/module replaced. The part number for the 03 model sedans is 47851-AM401. if your car is an 04 sedan the part number should begin with the same numbers. Usually there was an internal malfunction in the control unit that caused the computer module that controls and monitors this system to detect a Yaw Rate sensor malfunction which in turn caused the lights to come on and stay on. If your vehicle is a coupe, then the part numbers are a little bit different. I would recommend contacting any Infiniti dealer with your VIN number in hand and ask them if the VDC/TCS/ABS control unit has ever been replaced. Just so you know each and every time an Infiniti has been to the dealer and a repair order was written there is a record of that visit in Infiniti's database, and any dealer can access that information simply by putting in the vin number into their service computer. They can tell you where the car was originally purchased, service history, warranty repair history, any recalls, etc. I would highly suggest doing this, most dealers will even print you a copy of the complete history of the vehicle for a nominal charge. Hope this helps

Warranty extension on fuel tank vent tube clogging at a dealer will check to see if yours has clogging

try a comma or two

Are pulleys, adjuster/tension wheels and belts clean, as oil contamination can cause slip on well adjusted belts, not to mention degrade your belts much quicker. clean them all up good and try some belt slip spray if needed, should remove any residual and let them settle down.

Fix the stop lamp , when brake lamp is not on it won’t shift out of park

Yea sounds like a fuse to me.... generally fuses also protect your computer so all should be good there...check all your earths to make sure there is good contact to body of car or battery

hold the unlock button and lock but together simutaneously on your key fob for about 2 seconds or more. this deactivates and activates sound for you alarm. if it isnt those two buttons i know for a fact you hold two buttons down though..