Hyundai lantra 1999 radio code

SOURCE: code for honda accord 1999 car radio

sorry for bad news, but please rate me fixya!
this is why shops plug in a cigarette lighter plug battery before disconnecting car battery...you can make one yourself...

SOURCE: Hi, I bought a 2007 Honda Ridgeline The radio

you can call honda if it is the factory radio.. if you give them the vin number they should be able to help you... once you receive it you should keep it saved somewhere because every time you disconnect the battery it will reset again... sometimes you can find the code in the owners manual or sometimes you get a little card with the code on it... good luck

SOURCE: Timing marks setting Hyundai Lantra

Installation
Ensure timing marks aligned [6] & [7] . 1. Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket. Ensure belt is taut between sprockets. 2. Slacken tensioner pulley bolt [8] . Push tensioner pulley firmly against timing belt to tension belt. 3. Tighten tensioner pulley bolt [8] . Tightening torque: 43-55 Nm. 4. Except Matrix: Turn crankshaft one turn clockwise. 5. Matrix: Turn crankshaft two turns clockwise. 6. Ensure timing marks aligned [6] . 7. Apply a load of 2 kg to belt at . Belt should deflect 4-6 mm. If not: Adjust position of tensioner pulley. 8. Install components in reverse order of removal. 9. Tighten crankshaft pulley bolt [2] . Tightening torque: 170-180 Nm

7 is timing mark on cam,pin mark to top,hole in spoke below pin mark lines up with mark on head
6 is crank timing mark,pin mark on crank lines up with mark on block
NOTE this mark is just before top