1999 gmc jimmy rearview mirror diagram needed

The piece that is on the glass is glued on with an ultra violet cured adhesive, or a two part epoxy adhesive. The last one I did was cured by the sun in 24 hours (mix, set and cure).

https://www.youtube.com/watch?v=8IBp0Pkoa24

Gluing it back on

https://www.google.com/search?q=fixing+rear+view+mirror+mounting+plate

Permatex® Rear-view Mirror Repair Kit - Canadian Tire

https://www.canadiantire.ca > ... > Interior Car Mirrors
Jan 23, 2022 - Permatex® Rear-view Mirror Repair Kit contains everything required for making professional quality repairs in just minutes Two part adhesive ...
Mount Style: Adhesive
Assembled Weight (kg): 1.00 kg
Assembled Weight (lb): 2.20 lb
Assembled Width (mm): 10.00 mm Rating: 3.3 · ‎$6.49

How to Fix a Rearview Mirror - NAPA Know How Blog

https://knowhow.napaonline.com > how-to-fix-a-rearvi...
Jul 30, 2020 - Most rearview mirror repair kits only come with the glue components, some come with a replacement metal glue-on tab, but you still need a couple ...

Permatex® Rearview Mirror Adhesive Kit

https://www.permatex.com > products > permatex-rearv...
Permatex's Rearview Mirror Adhesive contains everything required for making professional quality repairs in just minutes. This repair kit includes ...

Rearview Mirror Repair Kit - Princess Auto

https://www.princessauto.com > product
Home · Auto Repair · Chemicals, Adhesives and Lubricants · Adhesives and Sealants · Instant Adhesives; Rearview Mirror Repair Kit.

I am working on the same problem. Hardware store guy said to get some rearview mirror adhesive and put a few drops all around where it goes onto the windshield mount and hold it steady until it sets up. Have not tried that yet.

should just be a torx 15 also t15 screw driver to unscrew it and u must use the rearview mirror adhesive sold at most parts stores

Get a rear view mirror adhesive kit at your local auto parts store. It will have the instructions on how to apply the mirror back on windsheild with the adhesive. I hope this helps!

should be a tiny allen screw holding it in..

Go to an auto parts store and buy rearview mirror adhesive. Your rearview mirror will separate from the small mounting piece that adheres to the windshield. Clean off the glass where it will sit. Follow the directions on the adhesive package and install the mount on the windshield. Once it dries, install the mirror on the mount. Rearview mirror adhesive is one of the most powerful adhesives on the market. Don't use anything but rearview mirror adhesive or the mirror will not hold.

You can buy a special bonding adhesive at a parts store to fix this. Usually there is a piece that the mirror attaches to, which is glued to the windshield. You will need to follow the instructions on the bonding adhesive, which will include cleaning the area where you will attach the mirror, and usually you separate the base mount from the mirror, glue it, hold in place with pressure for about 1 minute, reattach mirror, and you will be good to go.

The product does work fine, you can try it again. Make absolutely sure that all of the old adhesive has been removed, I use a new, sharp razor to remove the old stuff on both surfaces. Be sure NOT to touch either of the clean areas with your fingers. If you do, take acetone and wipe that part clean. follow the directions and good luck.

the mirror should simply slide over the metal mount (button) that is glued to the window.

loosen the set screw on the mirror mount...

hold the rear view mirror mount on the glass just above the metal mount (wide end of plastic opening facing down)

slide it into place...
secure it by tightening down set screw you loosened earlier.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

they sell a rearview mirror adhesive you apply to the windshield in the spot you want to put it in any parts store carries it...its called rearview mirror adhesive