At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The turn signal flasher on a 2014 Kia Sportage is typically located in the vehicle's fuse box. The exact location of the flasher will depend on the specific make and model of your Sportage, but it is generally located near the steering column or under the dashboard.
Here are the steps to locate the turn signal flasher:
Locate the fuse box: The fuse box in a Kia Sportage is typically located under the dashboard on the driver's side of the vehicle.
Identify the flasher: Once you have located the fuse box, look for the turn signal flasher, which is typically a small, rectangular box with two or three wires connected to it.
Test the flasher: Once you have found the flasher, you can test it by turning on the hazard lights and checking to see if the flasher is clicking. If it is not clicking, the flasher may be faulty and will need to be replaced.
if you google Where is flasher relay located on 1999 Chevrolet Silverado 1500 you will find answers. Look above the fuse box under the left side of the dash to locate the flasher unit. The flasher is a square unit that looks like a relay. It will have its own receptacle mounted separately from the fuse box.
The turn signal flasher and the emergency flasher on most cars are located in the same area. Turn on the emergency flasher and find the sound......the turn signal flasher should be in the same area.
located under dash to left of the steering colume. note there are 2 flasher relays one for the emergency flashers and the other is the signal flasher. to know which one is the signal one turn on the emergency lights and look for the flasher the one that is clicking is the e-flasher. the signal flasher looks the same locate it and replace.
Try below the steering column under the dash area. 1996-00 Vehicles
Fig. 3: Turn/hazard flasher location - 1996-00 vehicles
The turn and hazard flashers are integrated into one flasher on these models. The flasher is located on a bracket above the brake pedal. Replace the flasher by unplugging the old one, removing it from the bracket, and plugging in the new one.
Flashers: The convenience center is used to centrally locate various
buzzers, relays, flashers and/or circuit breakers. The turn signal and
hazard flasher units are usually located in the convenience center
located just below the instrument panel on the drivers side. Replace the
flasher by unplugging the old one and plugging in the new one. Confirm
proper flasher operation.
Most flashers are located in main fuse pannel. To locate turn on ignition switch but do not start. Then turn on turn signal as flasher will make noise and you should be able to locate.
I have a 94 Sonoma and to locate the turn signal flasher, inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher.
here is the location of the flasher
The Turn Signal and Hazard Warning Flasher is combined into one unit called a Combination Flasher (Combo-Flasher) The combo-flasher controls the flashing of the hazard warning system and the turn signal system. An inoperative bulb or incomplete turn signal circuit will result in an increase in flasher speed.
The combo-flasher is mounted to the in-line bracket which is located to the right of the Junction Block. The flasher can be removed by pulling in an rearward direction. The left under panel silencer duct must be removed to access the flasher. The combo-flasher is black in color for ease of identification
×