Diagram firing order of 98 chrysler cirrus 2.5

Perhaps that's why the vehicle was scrapped? There is some help in the link

https://www.google.com/search?q=98+Chrysler+Cirrus+transmission+wont+shift+out+of+2nd+gear

..

Here is a tutorial on changing the oil in a 98 cirrus (I assume it would be the same on your car) : http://autoresource.internetautoguide.com/change-oil-98-chrysler-cirrus-3178.html

Yes, the misses are cutting your power in half. The cylinders in the back half of the engine are not firing. The problem must be diagnosed to estimate repair costs. Possible causes are
1. Injector wiring harness cut or disconnected.
2. Major intake manifold gasket leak.
3. Camshaft slipped timing.

I have listed these in order of cost to repair, so have someone check for these conditions in the order above.

Greg Bernett 2821 Solutions February 14, 2010
You didn't post your engine size so please pick the applicable diagram:



1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise



1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise




4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise



4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)



5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

Source: spark plug wiring diagram for 98 tahoe

• 1

• 
  ledsled378 2926 Solutions July 24, 2010
  

..............................

Source: Need diagram for spark plug wiring for 1997 Chevy

Testimonial: "Thank you for your prompt response. Saved my husband from some distress!"
Was this solution helpful? Yes No

• 
  Dennis Weid. 44272 Solutions September 16, 2008
  

This was all I could come with, hope it helps.

96 Chrysler Cirrus 2.5L

http://autorepair.about.com/library/firing_orders/bl-chrysler-firing-97.htm

Just click on the one you need

THIS IS THE CORRECT DIAGRAM AS STATED THE FIRING ORDER IS 1-2-3-4-5-6

You didn't post your engine size so please pick the applicable diagram:



1996-98 4.3L Engines Firing Order: 1-6-5-4-3-2Distributor Rotation: Clockwise



1996-98 5.0L, 5.7L and 7.4L Engines Firing Order: 1-8-4-3-6-5-7-2Distributor Rotation: Clockwise




4.3L Engines Firing order: 1-6-5-4-3-2 Distributor rotation: Clockwise



4.8L, 5.3L and 6.0L Engines Firing order: 1-8-7-2-6-5-4-3 Distributorless ignition system (one coil on each cylinder)



5.0L, 5.7L and 7.4L Engines Firing order: 1-8-4-3-6-5-7-2 Distributor rotation: Clockwise

I apologize for the late response...Due to the bad economic situation this site has had a substantial (+50%) increase in the number of questions being asked in the last four months.

Not sure if you have the 4 or 6 cylinder, so I've included both below:

For the 2.4L (4-cylinders):
Firing Order:
1-3-4-2
Cylinders:
1------2------3-------4
(front of vehicle)
Ignition Coil:
.............................<--------4---------
------1------->
.............................<--Connector
------2------->
.............................<--------3---------
...........(FRONT OF VEHICLE)

For the 2.5L (6-cylinders):
Firing Order:
1-2-3-4-5-6
Cylinders:
1------3------5
2------4------6
(front of vehicle)
Distributor:
...................5
........4
.............................3
........2
......................... 1
...............6
(FRONT OF VEHICLE)

Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Here is the firing order.1 2 3 4 5 6

Here is a link of a site if you need.

http://autorepair.about.com/library/firing_orders/bl-fo-5195.htm

Good luck