I have a 1998 Jeep Cherokee Larado my son lost the clicker now this is not a factory alarm system it was installed aftermarket i guess. How can i start car without alarm going off.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn the door key in liftgate key cylinder. That will shut off the factory security. If it's an aftermarket alarm system, you will need the user's manual for that particular alarm to shut it off.
Is this a factory alarm, or after market? If its a factory alarm you can disarm the sytem using the key, insert into the door and turn the key so the door unlocks, this will disable the alarm.
If it's an aftermarket installed by a stereo shop, there should be a valet switch under the dash or somewhere, put the key in the ignition, turn forward and flip the dip switch in the other direction. If not, then you will need to go under the dash, find the alarm box and pull the plug out.
I had an aftermarket alarm on a Wrangler and encountered the same problem. With the car off I disconnected the battery, then pulled the fuse(s) for the alarm. I waited to reconnect the battery for about 10 minutes because the computer can hold memory with no power source for a short amount of time. (I did not put the alarm fuses back in.) This disables the alarm, but atleast the Jeep started.
×