Cars & Trucks Logo

Related Topics:

Christopher Posted on Sep 19, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

1999 chevy venture transmission won't change from

1 Answer

Kevin Campbell

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Cars & Trucks Expert 227 Answers
  • Posted on Dec 02, 2013
Kevin Campbell
Cars & Trucks Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: May 01, 2013
Answers
227
Questions
2
Helped
82409
Points
529

I have seen where the power supply to the solenoids is failed. Check the correct wire to verify power at the transmission. The computer will indicate that it is telling the transmission which gear to be in, but the solenoids have no power and cannot actually turn on. This is limp-in mode. It is definitely a power supply issue to the trans solenoids.

5 Related Answers

Michael Gutwein

  • 104 Answers
  • Posted on Feb 09, 2009

SOURCE: wont complete scan to pass emission test

When you rest your codes there is a series of tests your ECU has to go through before you can pass emissions. this is done some people can reset the code and go before its sets the code again. on the 96 you can have 2 tests not complete for it to pass. basicly you have to drive the car a couple days for the tests to pass.

check the readiness tests wait until only 2 have not passed. then you should be good.so drive and check.

Michael
ASE certified
PLZ rate.

Ad

Anonymous

  • 8 Answers
  • Posted on Mar 05, 2009

SOURCE: 1996 doge intrepid wont pass emission test because IM monitors ar

Just maybe your O2 sensors are not operating properly. They may be requiring your engine to heat them up to get upper temperature readings but not lower. You can easily diagnose these and all other sensors and problems by purchasing a Hains manual at your local Auto Zone or Advance auto store which will greatly aide you in diagnosing all your auto needs. And the fault symptom index at the beginning of the book will ease your troubles with professional one on one advice with step by step instructions. Its like having your own ASE certified mechanic at your finger tips. Good luck.

Anonymous

  • 396 Answers
  • Posted on Jun 28, 2009

SOURCE: P0500, intermittant speedometer, after sitting 6 months

Sounds speedmeeter is going haywire. Like everything in today's automobiles they are made with plastic gears. Some can be unscrewed under the stearing wheel others are not. The problem with the brake light break pads were probably stuck.I would say that your speedometer is not removable to many people disconnecting them for low milage on vehicle when trading or selling.

Anonymous

  • 56 Answers
  • Posted on Jul 15, 2009

SOURCE: 2000 chevy venture doesnt start

Not the IAC, or MAF, or 02

Does the Van Crank over?
Have you checked the IGN Relays? 1,2,and 3?
How did the Battery test out?
Anything below 11.9v battery is dead.
So I suggest that you do not throw any more parts and check the battery again.

Anonymous

  • 234 Answers
  • Posted on Jan 12, 2010

SOURCE: Having a problem passing a smog test on 1996 Toyota 4Runner SR5 V

NOX is produced when cylinder temperatures exceed 2500 deg. The systems in place to reduce NOX are EGR and the catalytic converter.
If the number is only slightly higher than avg then I would suggest the EGR, make sure that any vacuum lines are attached and that the diaphragm moves freely, be sure not to damage the rubber inside the EGR.
Retake smog test, if numbers still out of range replace the cat.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2004 chevy venture gear shift moves but transmission acts like it is in neutralhave to set park brak so van doesnt roll. makes like grinding noise when truing to shift back ino9t park

Best thing go to www.reliable-store.com they have got books on every vehicle and also how to service/repair it,

service/repair/owner's/maintenance manual with
parts info, fuse box, gear box, PCV, torque specs,coiling, wiring diagrams, electrical diagrams, fuse diagrams, error codes, etc everything
Worth it
0helpful
1answer

CAN 1999 CHEVY VENTURE PARTS BE USED IN 2002 CHEVY VENTURE

A lot of the parts can be used. Not all though, when it comes to engines and transmission.
1helpful
2answers

Why is my chevrolet venture suddenly increases rev and does not shift?

Low fluid is the main reason for this symptom. Check the fluid with the engine warm and running.
0helpful
1answer

2003 chevy venture transmission won't shift from 2nd

You might have burned out the transmission plates, try getting the transmission out of the car and inspect the plates inside.
0helpful
1answer

My chevy venture start but when I pull to any Gear the car dosen't move.

Hi and welcome to FixYa!

If it's a manual transmission then the problem will surely be on the clutch lining. If the clutch lining is worn out the gears tends not to move. If this is the case I strongly suggest that you replace the clutch lining, pressure plate and release bearing to resolve the problem.

If it's an automatic transmission I strongly suggest that you replace the torque converter and automatic transmission fluid to resolve the problem.

Hope this helps and thank you for using FixYa! Have a good one!
7helpful
2answers

2004 Chevy Venture will not shift into gear

Had neighbor look at this same problem. Turned out the shifter cable linkage near the top of transmission had popped off. They popped it back on and works but a bushing in the clip probably needs replaced. The neighbor rewched over engined top between firewall and engine and popped it back on.
Works fine but does needs a clip/bushing part and auto parts store has to get from Chevy
1helpful
1answer

99' chevy venture trans "slipping"

change it youll b fine i drive a 99 camaro with 165000 miles on it and i change my tranny fluid every 30000 miles if not comfortable doin that try slick 50 first
2helpful
3answers

Chevy venture 2004 Transmission

Bring to tranny shop or repair shop, have it scanned for trouble codes, many electrical parts and solonoids in those trannys, possible it may just be a shift solonoid bad or needs adjustment, much cheaper than replacing tranny. good luck!
Not finding what you are looking for?

240 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...