1990 v6 serpintine belt diagram

Robert, Serpentine belt diagram. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How To Install Replace Serpentine Belt Ford Taurus 3 0L V6 1AAuto com
2003 Ford Taurus V6 3 0L Serpentine Belt Diagrams serpentinebelthq com
2003 Ford Taurus Belt Diagram Am Having Problem Getting My

Google it

There are pictures or diagrams on the internet

Next time make a diagram-- before you remove any belt

Should be a diagram under the hood on most vehicles

What engine?

The serpentine belt diagram for 2001 aud A6 Quattro 2.8 liters V6 engine:


CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering

2006 TOYOTA 4RUNNER - V6 4.0L 3956cc GAS FI N 1GRFE
Belt Routing Diagram - Multiple Accessory, w/A.C.



From DAYCO Products Catalog

Hope help with this (remember rated this post). Good luck.

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1990/make/toyota/model/pickup/1990_toyota_pickup_drive_belt_routing_diagram.htm

no it needs a 3/8 drive

go to www.gates.com , click on the Parts Locator & Interchange link on the left, put in your vehicle information, after you have put in the engine size look below and find the serpintine belt for you application, ie. w/ac or w/o ac, click the camera icon and there is your routing diagram, hope this helps, let me know

Hopefully this helps. I just snapped this pic off my 1990 cutless cierra.

This is the diagram but you should have factory belt diagram sticker is still somewhere under the hood
If not:
http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0001D&l=n&catalog=auto&category=
To replace the serpentine belt on a V6 3800 you must jack up the motor and remove a motor mount. You must then use a breaker bar with a socket (13/64") and pull it toward the front of the car to release the belt tensioner. Put the new belt on, tighten it, put the mount back on, and lower the jack.
Driving without a belt can cause the motor to overheat, will cut power steering, and will not recharge the battery, so you should probably get a tow
Good Luck