At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a 2001 Aurora that the drivers seat belt light comes on most of the time, but then light goes out at times. What do I need to check to make repairs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
3.8 engine I have done few times,belt out,make way how goes,15mm. socket pull down to release belt,look what hold and remove all 15 mm. bolts.look wires and way go back.
On the Owner's Manual there's a procedure you have to follow to bleed the air in the cooling system, until you bleed the system for air, the low coolant light will come on every time.
The process is rather simple and quick, all you need is a flat head screw driver.
The seat is programmable to each keyless remote that comes with the car. If the car has the same features as mine, when sitting in the drivers seat and you look on the drivers side door there are two buttons labeled with a 1 and a 2 and if you adjust the seat to how you want it with the car on and then press either one of those buttons and hold it down until it beeps it will then set the seat to one of the two keyless remotes which each have a 1 or 2 engraved into the plastic back of the remote. Then every time you unlock the door the seat automatically readjusts to wherever it was set when one of those buttons was pushed to save the setting.
i do not know but it sound as if the element for the seat is going out or have a bad plug give these guys a call they only sells GM-parts its Schram auto & truck parts 1-800-292-1032 and they website is www.schramauto.com wish you the best of luck Michigan Man.
Most auto parts stores Advance/ Autozone etc will get the diagnostics codes from cars computer and tell you why the light is on and what the problem is if there is a problem.
Next time it goes on... or before you have cycled the key off and on three times... stop in at autozone... they will scan it for the codes for free... well they used to.
Robert
Please take a moment to rate this solution.. thanks
A common cause for the heated seats to not work is a burned heater element. There is an element under the seat cushion cover, and one under the seatback cover. If either has failed, both will not work.
HI.
ON Ford cars and Suv's,
Some times the sound chime after the seat belt buklet.
Is like a open door.
The problem on this car is that the the DOOR AJAR SWITCH. come danaged. and the Body cumputer don't recievethe door close signal.
But is intermitent.
The door ajar switch is on the door lacth.
You only can get front the dealer.
OK. I hope this information can be useful for you.
Checking the wire was very difficult to access but this did correct the problem.
Many thanks for your help and quick response.
Thank you
×