E36 bmw saloon

Check rear shockabsorbers!

They are so close to the same wiring and mounting and only a couple pounds different in pressure it should work out from my calculations

I think the sedan hood will fit the coupe, but you you should go to RealOEM.com and check the part number on the hood to make sure it is the same for both cars.

this could be due to a defective alarm sensor unit.

I have a BMW E36 1992, I have the security code for the radio but don't know how to enter it, can you help Thanks

Hi i have just put the rear bar anf front bar form a e36 convert on my saloon that i got from the scrap yard the other week and they fit fine for me..... i hope this helps you.

Both E36 and E46 models have oil filter under the hood, towards the front of the block. You will need a special socket to remove the oil filter cap and once it's out, can replace the filter. Make sure to replace the gasket on oil filter cap, it should come in oil filter kit you bought.

Hello Joe

Yes you have an E46, You need to order the UK drivers side glass and make sure you specify it's a coupe. the saloons have a different wing mirror.

Hope this helps, please don't forget to rate me.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

You car should have a harnas already installed. Sigma and stellar alarms are easy to fit according to pro's. visit bmw e36 blog for more details.