It just wont stop spinning the fly wheel after i start the car, i was hoping someone could help me
It sounds like the "bendix drive" is gone in your starter. This is the assembly that engages and disengages the starter to the engine. The only way to fix the problem is to replace the starter. Hope this helps.
SOURCE: car will not start
Recheck the battery, the starter doesn't care if your battery gives 12 volts, it needs CCA (Cold Cranking Amps), Autozone will test this for free where I live, most likely where you live too.
SOURCE: Ford F150 starter does not engage, spins the catches off and on
Most Likely The Starter I Know We Changed It Is What your Thinking.
I Done 3 In A Row And The Fourth One Was Finally Good.
SOURCE: grinding
It could be the flywheel, but try putting different size shims in between the starter and engine.The starter might be a little to tight against the flywheel. You should be able to get the starter shims at any auto parts store, or ask where you can get some.
SOURCE: starter wont stop spinning
The starter relay may be sticking on start. Get someone to start truck and when problem starts hit relay lightly wih hammer. A cheap voltmeter will tell you if relay is sticking or still energised from ingnition switch after key release from start position.
SOURCE: won't start, starter will spin but will not engage fly wheel to crank up engine
Sounds like the starter drive is shot, best thing to do is replace starter with new or rebuild.
798 views
Usually answered in minutes!
×