Can I convert a 2012 Acadia SLT which has one power seat, to two power seats with memory on the driver side?
SOURCE: driver side power seat 2001 Chevy Tahoe
as long as nothing is stuck in track and you hear no noise when using switches, look for broken wire at connector or in harness. ck fuse first of course, if blown, something may be stuck in track causing it to stop and blowing fuse
SOURCE: 2005 Buick LeSbare Power Front seats will not move
Check all fuses and relays. Sounds to me like one is blown.
SOURCE: DRIVER POWER SEAT 1996 TOYOTA AVALON WONT
Check all your fuses in the fuse box. A fuse must have cut off.
SOURCE: 1999 Cadillac Deville Driver side power seat not working
No fuse.These seats are protected with relays and a seat module.The module is under the drivers seat.There are 3 connectors and it would be hard to check all these wires for power to the motors.First look under the seat and make sure none of the connectors came apart under the seat by something that might have been left or rolled under it.The 2 main ones you can check are the connector 2 terminal C and connector 3 terminal A.C is a black wire which is ground and A is a red wire which is the feed power wire.Connector 2 is green and 3 is black.If the ground and power wires are good then you could have a bad drivers seat module.What I would do is go to the salvage yard and find a used module to try.Good luck.
Testimonial: "Thanks for your assistance. Great information"
SOURCE: 2004 suburban drivers side power seat and both
This is controlled through the body control module you will require a scan tool to access it.
82 views
Usually answered in minutes!
×