Input Code lost security pin for sound system

You can't. The security system and immobilizer is there to stop EXACTLY what you are trying to do, start the car without the key and security code credentials.

Your local dealership with make you a key based on the VIN Number. Then you have to reset the security system.

Or you can try a local mobile locksmith.

Or find the key. If you lost the key in the snow, look up 'Ring Finders', a global network of metal detectorists that find lost rings and keys.

With all those codes, you need a good auto-electrician with a $5,000 pro grade scan tool computer. Most of this is Body Control Module issues.

U0141 Lost Communication With Body Control Module "A"

https://www.obd-codes.com > u0141
Code U0141 pertains to the BCM "A" or the wiring to the BCM from the engine control module (ECM). The code, depending on the year, make and model of the ...

U1403 - Implausible Fuel Level Signal Received - Engine ...https://www.engine-codes.com > u1403'What is U1403 code meaning? ... The Fuel Level Sensor signal is a direct input to the Body Control Module (BCM). The BCM transmits the fuel level message to the ...

U110C CHRYSLER Code - Lost Fuel Level Messagehttps://www.engine-codes.com > u110c_chrysler'What is U110C CHRYSLER code meaning? ... The Fuel Level Sensor signal is a direct input to the Body Control Module (BCM). The BCM transmits the fuel level ...

U110E CHRYSLER Code - Lost Ambient Temperature Messagehttps://www.engine-codes.com > u110e_chrysler'What is U110E CHRYSLER code meaning? ... The Ambient Temperature Sensor signal is a direct input to the Body Control Module (BCM). The BCM transmits the ambient ...

Code U0100 stands for Lost Communication with ECM/PCM. The powertrain control module (PCM) is the computer responsible for engine management. Like the other computers (known as modules) onboard your vehicle, the PCM communicates over a bus.U0100 - OBD II Trouble Code: Lost Communication with ECM ...

The anti-theft feature is intended to discourage
theft or the audio system by preventing
the system from operating when it
is moved to a different vehicle.
This feature works by allowing you to enter
a Personal Identification Number (PIN).
When the audio system is disconnected
from its power source, such as when the
audio system is removed or the battery is
disconnected, the system will not operate
again unless the PIN is reentered.

On Page 4-52, it goes on to say:

Setting the Anti-Theft Function
1) Turn off the power by pressing the
power on/off knob (1).
66J118
2) Press the power on/off knob (1) while
pressing and holding the track up button
(2). The "ENTRY 0000" will blink
and the audio system enter PIN-input
mode.
NOTE:
Establish your PIN by combining numbers
from 1 to 6 into any 4-digit number. If you
forget your PIN, when you remove the battery
for repair etc., you will no longer be
able to operate the audio system.
66J117
3) Input the four digit PIN using preset buttons
1 to 6.
66J118
4) After you enter your four digit PIN, the
display will return to "0000".
66J117
5) Input the same 4-digit number you previously
entered.
66J120
6) The power of the audio system will turn
off.
NOTE:
Write down your PIN for the future use.
Canceling Your Established PIN
Setting
This operation is to be done when you
want to cancel the anti-theft function or
change your PIN.
1) Turn off the power by pressing the
power on/off knob (1).
66J121
2) Press the power on/off knob (1) while
pressing and holding the track up button
(2). The "DELETE 0000" will blink
and the audio system will enter the cancel
mode.

& finally, Page 4-53 wraps it up:

INSTRUMENT PANEL
66J124
3) Input your PIN. The power of the audio
system will turn off and your PIN will be
deleted.
To change your PIN, first delete your
current PIN, then set a new one.
Confirming Your Personal Identification
Number (PIN)
When the main power source is disconnected
such as when you exchange your
battery, etc, you will have to confirm your
PIN to be able to use the audio system.
To confirm your PIN:
66J122
1) Turn the ignition switch to the "ACC"
position.
66J125
2) Input your PIN.
If the PIN that you input matches the
registered PIN, the power of the audio
system will turn off, and you will be able
to operate the audio system.



AND THIS IS AN IMPORTANT NOTE:

• If you input your PIN incorrectly, "----" will
be displayed and the anti-theft function
lock mode is entered. If you enter an
incorrect PIN fewer than 6 times, the
locking time will be for 15 seconds; if you
enter an incorrect PIN more than 6
times, the locking time will be for 15 minutes.
• If you forget your PIN and enter a wrong
PIN, you can not perform any further
operation.

Hi Hamdija, You can check out the link below for more information or take your registration papers with your licence (licence is to prove YOU own the car) to a car dealer ie: Holden, Ford, Chrysler and ask at the sales office for the RADIO SECURITY PIN NUMBER, You'll receive your Radio security pin number and Radio serial number. These numbers belong to your car and once you have them DON'T loose them because in Australia some dealers charge a fee and some don't.... Hope this helped....CHEERS..https://www.google.com.au/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=RADIO+SECURITY+PIN+NUMBER
https://www.google.com.au/webhp?sourceid=chrome-instant&ion=1&espv=2&ie=UTF-8#q=RADIO+SECURITY+PIN+NUMBER

Disconnect batt see if it clears. Or unplug computr..clean connection pins...see if unit reboots. Dirty brake fluid can ruin abs module. To pinpoint du a datastream w a factory scantool and not at a dealer. Code readers dont give u numbrs for decision.

The problem is with the factory security system; you'll need to reset the security code matching between the security system and the code on your keys that came with the new column.

Diagnostic Test Code (DTC) P1193 is a manufacturer specific code (not listed in SAE J2012 as a standard generic fault code). Dodge lists the code definition as "Inlet AIr Temperature (IAT) Sensor Voltage High"
This code can have an affect on how your engine runs because the engine controller uses input from this sensor to adjust fuel and timing controls.

However, the symptoms you are describing do not sound like something that an IAT sensor would cause. It sounds more like your immobilizer is shutting things down (security system "thinks" somebody is trying to steal the vehicle)

I would recommend scanning your Body Control Module (BCM) and checking for active codes for your security/imobilizer system. It would probably also be wise to scan the REST of your computer network (ABS, IPC, etc.) to check for any fault codes there or network communications faults.

Call the service care....

The audio system wont come on because you have to input the security code on your radio. The code is written on the papers of the car.

disconnect the battery and all is well