2000 chevrolet tahoe - can't put the gear stick in park. Can put gear stick in reverse and drive. Can drive and drive in reverse. But cant put gear stick in park.

Not sounding to good. Sounds like you wiped out the planetary gears. Depending on the damage, your looking at $2000 rebuild.

I put my truck into drive or reverse n it will not move at all ...

www.cargurus.com > Questions > GMC > Sierra 1500

CarGurusJan 27, 2014 - Alright well normally I can feel my truck shift into drive or reavers but it's not but .... running while won't move,I mean it moves but won't change gear,fluids good ... I have a 2002 Mercury Stabler Car starts up fine but will not move ... I hear a pop and my tahoe stops pulling and no reverse either it just revs up.

Chevy Tahoe Transmission Problems - Car Forums at Edmunds.com

forums.edmunds.com > Chevrolet > Chevrolet Tahoe

Dec 16, 2009 - 30 posts - ‎22 authors
Vehicle won't drive in 2hi in drive or 3rd will move with rattling noise in 2nd or 1st. ...maintain 60mph and when I crested the hill the truck no longer would shift into 4th gear.... Can feel transmission engage in all but Reverse. GMC Yukon, Yukon XL Transmission Problems
30 posts
Sep 26, 2010
Chevrolet Suburban and Tahoe No Start problems
30 posts
Apr 27, 2009
More results from forums.edmunds.com

30 Common 4L60E Transmission Problems & Repair ...

bad cable.
or loose or maladjusted
its all here.

alldata dot com

It really sounds like a tranny problem, best addressed by a Transmission shop. It might be an easy fix, or a really expensive one.

At this website
www.reliable-store.com
I
found all complete guide, much better language, complete detail in 800+ pages, and they also have live assistance feature

sounds like the cable from the gear stick to the gearbox selector switch has been put on wrong ,put the car into reverse so that the reverse light is on , turn the ignition off and find the gear selector on the gearbox , pop the end of the cable off it then put the gearstick into the "R" position and refit the end of the cable back onto the selector switch , hope this helps

there is adjustment down on the ******. I will send you a picture, what you will need to do it put on the e brake,and block the tires. on the drivers side of the ****** the shift cable is located, pop off the cable from the arm and pull the white clip, when push the arm foward that is park,and then easily pull the cable to the arm and put back the white clip

planetery gears or sprag gear,need to have trans.rebuilt

It sounds like you have a damaged shifter cable.It is an adjustable cable but if it is that far out of adjustment then it is probably damaged. Replace it.

On my 93 S-10 Blazer there is a small cable that goes from the shift lever to the gear indicator. As you shft gears it pulls the indicator with it. that cable may have come off or broken.