.torque specs. f-350 2008 diesel 6.4
SOURCE: Need torques specs for main
Main bearing torque is 56-62 Ft/Lbs..I would use 60
Rod bearing torque is 23-28 Ft/Lbs..I would use 25
SOURCE: NEED TO KNOW WHAT ARE THE TORQUE SPEC N A F250
I hope this helps you. WF
Stage 1: Tighten the vertical fasteners 1 through 10 to 37-43 Nm (27-32 lb/ft). Rotate fasteners 1 through 10, 85-95 degrees.
Stage 2: Tighten the cross-mounted fasteners 11 through 20 to 27-33 Nm (20-24 lb/ft). Rotate fasteners 11 through 20, 85-95 degrees.
Tighten the connecting rod bolts in two stages, using the sequence shown.
Stage 1: 40-45 Nm (30-33 lb/ft)
Stage 2: Rotate 90-120 degrees
SOURCE: main and rod bearing torque specs
do you have a Haynes Manual or Chilton? if not check your local library, they may have one, the specs are in there
SOURCE: Need torque specs for 2000 Ford taurus 3.0 flex
main bearing caps 56-62 foot pounds connecting rod caps 1st pass 17 foot pounds 2nd pass 32 foot pounds......................HAVE FUN
5,549 views
Usually answered in minutes!
×