SOURCE: No turn signals, hazards or brake lights
replace the turn signal switch in the steering column
SOURCE: Tail Lights & Brake Lights stay on even when car is turn off
the plastic round stopper most probably broke that is were the stoplight switch sits when not depressed easy fix find a washer small enough to block the hole were the original plastic stopper was making sure the washer aligns to the brake light switch and secure washer w/ zipties hope this helps.
SOURCE: 2006 ford e250 van\r\rear tail lights dimmed and now dont work(.)
check the fuses and relays under the hood next to the battery. if they still dont work it might be in the wiring or if it has a tow package it might be in the trailer wiring
SOURCE: 1992 ford ranger =no tail lights,,,,brake and turn signals work
try turning your lights on.....
SOURCE: how to replace brake light in 2008 chevy express cargo van
You have to remove the upper applique to remove the tail lamp, it is the trim panel above the lamp. I think it is held in place by two nuts/bolts but not sure. You have to have the rear doors open to remove it
696 views
Usually answered in minutes!
×