At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
this happened to me in one of my cars, I bet that if you put the factory radio back in it will work just fine, most of the radios components, are part of systems wiring and used to send signals to ecm to let car start
The voluum control is bad and needs a replacement to control the sound. It has happened to me also on this year vehicle years back. I went and purchased a used radio which worked fine. Aftermarket replacements are good also but very time consuming to install
check all the fuses.the radio is designed to stay on until you open the door once the vehicle is shut off ,so the radio and the locks are linked together.there is a low current 7.5 amp fuse or very close to that
Lighting of the lcd ? Could be an internal radio component. Check the web - seems to be fairly common with the radio ( made by Panasonic) where there is a small resistor that gets fried and results in the loss of the lighting . The CD changer also has problems.. I should know.. It happened to my 03 Accord also.. You can get a remanufactured unit on ebay for < $100 . Also, there are online tutorials on how to remove the radio. Good luck
Radio could be wired wrong. Check the constant and accy power on the radio with a multimeter and make sure you are getting 12V on the constant and getting 12V on the accy only when the car is in accy or on. Also make sure the wire harness is properly wired. This can happen often if the radio constant and accy power wires are wired in reverse.
×