1995 Chevrolet C1500 Logo

Related Topics:

Posted on Jan 10, 2013

Ez entry seat not working

Ext cab to gain entry the seats don't slider all thr way , is there an adjustment to repair or what

  • erwin traylor
    erwin traylor Jan 12, 2013

    the handle is not broken

×

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Dec 11, 2008

SOURCE: BROKEN HANDLE TO RECLINE SEATS ON 1999 S-10 EXTENDED CAB PICKUP

Ebay sells a replacement handle that looks exactly like factory handle but just screws on, it is a very common thing to break, as mine did.

Ad
countrysi248

Jerry Koski

  • 443 Answers
  • Posted on Apr 20, 2009

SOURCE: Need to replace driver light grey leather power seat - where to go.

I AM NOT GOOD WITH UPHOLSTERY BUT I BUY ON EBAY ONCE IN A WHILE AND I FOUND A GOOD UPHOLSTERY GUY THAT YOU CAN GET THIS SEAT OR JUST THE BOTTOM FROM IF YOU NEED IT .. I HAD HIM DO ME ONE FOR MY LEATHER SUBURBAN AND WOW ITS NICE AND I PUT IT ON EASILY THE HARD PART WAS TAKING THE SEAT OUT THEN FOUND OUT IT WAS A SNAP TO PUT ON .. THE GUYS NAME ON EBAY IS upholsteryguyss.gif IF YOU NEED ANY HELP WITH THIS LET ME KNOW YOU WILL BE IMPRESSED WITH HIS WORK.. AS FAR AS THE HEATED SEATS AND THE LUMBAR GOES YOU MIGHT FIND THE PROBLEM WHEN YOU GET IT APPART PUTTING ON THE COVERS .. USUALLY THEY GET BAD CONNECTIONS AFTER A WHILE.. THANKS JERRY AND HOLLER IF YOU NEED MORE.

Anonymous

  • 4669 Answers
  • Posted on Jun 07, 2009

SOURCE: TILT HANDLE BROKE ON DRIVERS SEAT (MANUAL- NOT ELECTRIC)

This is a common problem and you can buy a new handle at O'reilly's that will slide over what is still sticking out of the seat and tighten with a set screw.

Anonymous

  • 1 Answer
  • Posted on Mar 30, 2010

SOURCE: Heated seats not working

Mine did the same thing this morning... mine is an 03 as well. Did you ever figure out what was wrong?

Anonymous

  • 1 Answer
  • Posted on Dec 11, 2010

SOURCE: ELECTRIC SEATS &PASSENGER SIDE WINDOWS DONT WORK

2003 surbarban driver seat and passenger windows have common fuse/breaker under hood in fuse panel. 50 Amp fuse upper left of box, marked mped this is a big fuse not the little ones.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Remove rear seat 1993 chevy 1500

I just took out my rear seat from my 1993 Cheyenne ext cab. Fold the back seat in the up position. There are 2 square stubs sticking out from each side that the hinge plates of the seat slip over. Take out the 5/8 bolt and washer securing the hinge plate to the stub--slide the seat assembly toward the rear of the cab--and lift up and out.
Once you have the right solution--it is a 5 minute job !!!
tip

How to stop silverado truck seat moveing back and forth

This is for the person that don't want to remove seat for repair. If electric motor adjust the seat where you want it to stay and unplug seat motor push seat forward to take out the slack and take a small pair of vise grips and clamp on the seat track. This will stop the seat moving back and forward. Save $$
on Apr 12, 2014 • Cars & Trucks
1helpful
2answers

Had the battery changed in 2007 nissan murano and now the chimes don't ring and the drivers doesn't automatically move back when opening the drivers door. How do I reset these?:

Disconnecting the battery erases stored memory,after you connect the battery put the key in the ignition cylinder and turn the driver door switch on(open) and off (closed), on (open),the entry,exist function then becomes complete, and the return operation can be operated,
0helpful
1answer

This morning i went to crank my truck a 2006 Ford F150 and the battery was dead. After I got out to pop the hood I heard a strange clicking sound coming from in between the cab and bed - that is where it...

Pure SWAG on my part, but the only 2 things I can think of on the back cab wall are the power slider motor ( if a rear power slider is installed ) or the VSM ( Vehicle Security Module, called a Body Security module on 04-05 MY ).

should not be clicking, maybe an issue with maybe the ground to the VSM ?

You would need to remove the seat back if it is a SuperCrew or SuperCab, to get to the VSM to check the ground, and if any of the pins are discolored in the connectors ( remove and check ):
sscullys_201.jpg
sscullys_202.jpg
sscullys_203.jpg
These are the pictures from when I installed the heated seats in my SuperCrew
Where the screw driver goes into release the clip.
sscullys_204.jpg
Close up of what you are shooting for when the seat is installed, the screw driver needs to go through that openeing to trigger the clip.
sscullys_205.jpg

The trigger you need to press to release the seat back. Best once you get 1 side released, stick something under it so it does not click back into place, I used a 2x4 in a sock to slide between the seat back and bottom.
sscullys_206.jpg
0helpful
2answers

Plastic seat adjustment is broken and allows seat to move freely foward and back in my 1999 z71 exstended cab. does chevrolet make a metal replacement for this problem??

No they don't. But the ones I have worked on are the same size as the manual door handles. You might try one of these. They do make these out of metal, Even chromed.
0helpful
1answer

Code p1633. car spudders,hesitates,chuggs. runs better sometimes that others.keyless entry,power drivers seat, not working. low voltage seems possible. what should i do?

P1633 --Keep Alive Power Voltage Too Low

You provided no vehicle info

I would suspect battery connections or a near
dead battery

You could check the fuse but will have to use your
owners manual,we don't have any data for anything,
we are at home like you

Then the most likely cause is a poor wire connector

I suspect from your name,your not onto car electronics,
so a repair shop will be your only bet

They aren't too fond of fords or lincolns ,so your running
the show & telling them what to test & repair. Your looking
at diagnostic time, no parts or actual repairs
1helpful
1answer

Saturn vue 2007, rear folding seat will not return to proper position due to seat belt being locked up.

They have a problem with the seatbelt retractor getting jammed up causing the belt to jam & not let the rear seat fold back up.The easiest way to get the seat back up is to cut the seatbelt & fold up the seat.Then the rear seat needs to be disassembled to gain access to the seatbelt retractor assy which has the seat belt made on.Hopefully it's still under warranty or Ext. warranty.hope this helps
0helpful
2answers

I want to know where i can find the door code for a ford 2004 f150

If you are refering to the Keyless entry code it may be on a white wallet card in the owners manual package. If your truck was bought used it may be with the previous owner.
0helpful
2answers

2008 Colorado Airbag Deactivation

usually you can insert your key in the slot thats near the airbag light in the dash and rotate it to turn it on and off
Not finding what you are looking for?

59 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...