Ball bearings fell out of valve body?Need diagram to replace?

SOURCE: I REMOVED THE VALVE BODY

Those are valve body check balls and they must be put back in the proper place for the transmission to function properly. Try not to panic. If you look closely at the passages in the valve body, you will probably notice that some of the them have small indentations beside them. If you find passages with this difference in the same number as the check balls, then install them and then install the valve body by lifting it straight up and carefully aligning it with the transmission housing before making contact with it. Good luck with your effort. I hope this information has been helpful and thank you for trying Fixya.com.