Hi there .... you'll have to get the car scanned for codes. if you are in the states, take it to someone like autozone and they can scan it for free and give you the codes. post the codes here and we can help you out. if you live in Canada you'll have to take it to a shop or find someone with a code reader and they can tell you the codes. Again if you don't want the shop to fix it,post the codes here and we can help you.
Go to auto parts store and get codes checked for free... then advise me/us of codes for proper repair/reset diagnosis ...good luck
SOURCE: Car failed inspection because of the check engine light
to ideas come to mind, maybe a bad bulb in the dash (you can take this out (depending on mechanical knowledge)
or find a smaller inspections shop and try taking the car in again in hopes of that they won't catch it
SOURCE: ck engine light , p1107 code reading ,cant find any vacum leak? olds 88 96 model 3.8 liter.
a3342: Your code is for map sensor intermittent low voltage.
This car has on board diagnostic capabilities which is what AllDATA recommends doing first.
SOURCE: My check engine light wont go off.. i have
Take it to autozone to get it reset and see if codes are still there But write down any additional codes you find, also if you bought a after market 02 sensor it may not be hooked up right. I have had this problem with after market 02 sensors for the past year. Bad batch and it does happen, once engine has been shut off and ran three times it should have went off by now.
SOURCE: I have a 2002 Audi
Replace oxygen sensors and have OBII scan at any good parts store and they can reset light door you. They do the scan free
271 views
Usually answered in minutes!
×