I own a 2001 chevy silverado and the tow haul does not work. There is no error codes and the two wires under the steering column are connected. Could you advise what else i could look for? the button on the gear lever seems to be OK. I checked this with a multimeter for a circuit.
If the unit is getting the signal frim the pedal depression, it has to work. check that it's getting the signal when you depress the pedal. Check those connections, if all that is fine, the unit itself is faulty.
SOURCE: tow/haul does not work on 2000 chevy truck. whereis fuse?
I had a problem with my tow/haul button not working. I came to find out that the gear shift had cut the wire running to the button in two. You may want to check that.
SOURCE: 1998 chevy lumina, shifter on steering column,won't shift
Either the pin that connects rod to tranny is broken off, or there is internal transmission problems.
SOURCE: 2001 chevy silverado steering wheel vibration problem
bent alloy, bent steel rim, broken belting inside of tire(caused from hitting a good size hole). lug nuts not torqued to correct ft lbs, outer or inner tie rods, toe/ cmber out of adjustment. Are the tires wearing? If not, forget the camber/toe
SOURCE: my chevy silverado 2000 tow haul wont work, light
check all your fuses. If your lucky you might find one the is blown and could be related If not fuse related then you need to remove the platic steering column cover. Under there at the end of the shift lever you will find two small wires that are for the tow haul button. These wires get brittle and break over time from shift level movement it seems. You will have to repair the broken wire and you should be good to go!
872 views
Usually answered in minutes!
×