How do i reset the timming on a toyota hilux 2000 model
If you can remove the timing cover and try to bring the engine using your hand with a tool by turning the crank shaft with the engine off and battery terminal off,to the timing marks. surely the camshaft and crank shaft sensors do have some marks. if it is diesel engine also the fuel pump has mark too. If you aligned the marks and are in a correct place then you problem is something else,If the marks are not aligned then you timing is wrong and try once more to fit it whilst in a correct place.
SOURCE: tow bar specs for 1988 hilux and 1983 toyota hilux, are they same
I'd check with manufacturer of tow bar to be sure it bolts on the same etc. I'm sure they would give you that info, and if nothing else, call a place that sells them and ask for kit number for both vehicles & if they are the same number, well, just need to check that they bolt on exactly the same, that's why I would contact manufacturer for copy of install instructions for the new install.
SOURCE: timing belt toyota hilux 2000 broken
More than likely you have some bent valves which can lead to alot of money to fix. If you can do it yourself try to find a wrecked one or one with a bad bottom end and just get there cylinder heads and put on your motor with a new timing belt.
SOURCE: Hi, what is the wheel centre bore diameter of
6 x 139 from what little info i could find. i wish i had the manuals i had access to 12 mos ago. cheers, i hope this helps.
345 views
Usually answered in minutes!
×