20 Most Recent
2002 Toyota Land Cruiser Questions & Answers
C1256 accumulador low pressure
so where did you see C1256,. ????
just clue
first google hit, did you even try?
http://www.purefjcruiser.com/docs/2007%20Toyota%20FJ%20Cruiser%20Repair%20Manual/Brake%20Control/Vehicle%20Stability%20Control%20System/0280030.pdf.
WHERE AND HOW DO YOU FIT THE LOCKING CLIP
You would need to be more specific about which locking clip you want to fit into the vehicle. Which part of the vehicle are you trying to lock? The easiest answer is to use the ignition key, but I'm guessing that your question is more serious than that. Cheers!
Why is my Toyota Landcruiser 1HZ motore missing and blowing white smoke?
Air leak in the fuel line? All the lines are pressurised to some degree.
Do you mean it was sucking air on the tank to pump side?
Because its a diesel and you have white smoke and a misfire you need specialist help to identify which injector is playing up. White smoke is usually excess fuel or incomplete firing on that cylinder. Toyota lumps are very reliable so get some help, a good diesel mechanic would have a clip on tester that would check each cylinder.
At 2002 I'm surprised there is a fuel problem but you don't give mileage so an injector is the best guess.
P1105 p0105
105=MAP Circuit Malfunction (generic USA fed spec)
1105 = same as above but P1 means toyota factory code,
so what does this mean, it means the MAP monitor (tests) are failing.
what can make this fail; lots.
1: map bad.
2: map port clogged with crud, clean it, some cars have hose, it fell off or some one unpugged it, with key engine running.
3: wires to map bad.
4: engine vacuum real bad. a massive air (vacuum) leak. to the engine plenum and intake track.
reset it and see if it comes back
no engine power issues, as THE map RUN THE FUELING SHOW.
Not finding what you are looking for?