Info panel by gear shifter is not working anymore 96 grand cherok

You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV, troubleshooting, engines,
owner's/service/repair/parts/maintenance
manuals etc everything
this website www.reliable-store.com
it's a very good website for vehicle problems even as old as 1991 ford..

Theo, have a good tech. check linkage/shifter/cable/bushings/mount diagnose and estimate repair.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

There isn't a inside fuse panel on these. It's under the hood.

sound to me like a basic sloppy shifter, did you inspect the shifter and all parts associated?
usually the synco dont stop shifts, only causes grinding
unless, it is shattered. (rare that)
it only matches speeds, so if cracked in half , you can shift by
double shifting , like racers and truckers did for years, "crash boxes"
RTM
http://hondatech.info/downloads/Auto/Manuals/Civic/

Could be the brake light switch or the solenoid that locks the shifter in park. Sometimes there is a button or tab near the shifter to unlock it in an emergency. Sometimes you can take it out of park if you turn the key but not to the on position.
Your owners manual should have these procedures, and you can do an internet search for the process to take the console out if needed.

Tail light/ dash light/ license plate light fuse is blown.....one fuse lights them all up.

Have codes checked . My first guess would be that the shift control module is not working properly, speed sensor could be out of range, and giving module incorrect info, but that's why there are tests.

it should be a problem related to fuse. did u check your fuse box?

Check this info: 93ZJ-Secc-14-Fuel-System

Good luck!!!

it may be a brake light switch. on most vehicle the brake light switch releases the shift lock that may be your problem