My 2006ford fusionselv6 door won't open from the inside but it will open from the outside. I heard a pop sound I think it' might be the pin that holds thebar that unlocks thelock can you help
It sounds like the connecting rod popped out of its plastic connector. Pull the door panel off and check both ends of the rod. It must be unhooked at one end or the other.
SOURCE: 2006 Ford Fusion inside door handle stopped working
you have to open the door panel and you will see the link has dropped ou of its retainer just push it bak and make sure you lock the tab yo shouel be fine
SOURCE: what should i do about the handle drivers side can i replace myself
Easy to do.. takes just a few minutes/ couple screws/bolts- but the part is expensive @ ford dealer.. i think about 40.00+ -
SOURCE: 2006 Ford Fusion. Left front door inside handle
back door electronic door handle will not lock when i lock it with remote, i need to lock it manually
2,106 views
Usually answered in minutes!
it sounds like tha could be the fix to the problem but it's my daughters car and it's not here right now also I need a picture of the inside of the door to see how it goes together. thank you for your help
I'm sorry we won't have the car to try to fix it until Thursday but I will let you know if it's a fix Thank you so much for helping so quickly, this is my first question I just joined today, now I know how this works!!
the problem with the 2006 Ford Fusion turned out to be the plastic door handle on the drivers side was actualy broke, we got the part at Ford dealer for 60.00 thank you Mark for your help you tried but it wasn"t the rod
×