How to change the spark plugs of my 2003 lancer (not turbo)? Thanks in advance.
So u have a CH/CG lancer
you would need to remove the two 10mm bolts from the coil packs and leads and then stick the smaller version of spark plug socket in remove them, bear in mind if u have a mivec motor the spark plugs MUST be Platinum :)
Necesito una pieza que lleva debajo del cigueñal, se llama sensor cranche
SOURCE: 2003 Mitsubishi Lancer
basic rules.
1 remove the cable.
2. use the right size socket and insert it to the plug.
3. loosen the plug and clean or replace.
4. tighten it back.
5. do it one at a time. it would be confusing to install the wires back if you pull them at the same time.
tnx 4 using fixya and tnx 4 asking,
drcool
1,050 views
Usually answered in minutes!
×