...2003 lancer (not turbo)? Thanks in advance. so u have a CH/CG lancer you would need to remove the two 10mm bolts from the coil packs and leads and then stick the smaller version of spark plug socket ...
2003 Mitzubishi Lancer oil pressure light only when braking 2003 Mitzubishi Lancer oil pressure light illuminates only when braking. Try replacing the Oil Pressure Switch/Sending Unit. It should only ...
...2003 mitsubishi lancer My daughter's 2003 Mitsubishi lancer will not start. It has the clicking sound and I tried to jump start it. My son says it's the starter, but he's in another state so he can't ...
...2003 LANCER.. ANY IDEA WHY? GOES UP AND DOWN OTHERWIZE RUNS GREAT. i just fixed mine.. take out your idle air intake valve, clean it all out. mine had the same issue. foreinstance in neutral my rpms ...
firing order what the firing order for 2003 lancer 2003 Mitsubishi Lancer 2.0 liter SOHC L4 and 2003 Mitsubishi Lancer Evolution 2.0 liter DOHC Turbo L4 Hope helps.
...2003, the Lancer (or equivalent) was manufactured and sold with engine sizes of 1.3L, 1.5L, 1.6L, 1.8L, 2.0L, and 2.4L, depending on where it was manufactured or originally sold. Mitsubishi is an ...
...2003 mitsubishi lancer LS or CH 3.8 Quarts of oil, I found. But, I found a link that has a number of specs for the 2003 mitsubishi Lancer: ...
2003 Mitsubishi Lancer es question cant figure out 2003 Mitsubishi Lancer es question cant figure out where the inlet heater hose is located. need to find it for my flush kit. Unfortunately, I do not ...
where is the location of dlc for lancer 2004 You will find the Data Link Connector (DLC) for a 2003 Lancer, below the steering column to the left.
Question about 2003 Lancer
2003 Mitsubishi Lancer with 4G18 engine. I need cylinder head torque specs please? I'm looking to tighten up my 2003 Mitsubishi Lancer that is fitted with a 4G18 1.6 engine. Have on after market ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions