P0741 Torque Converter Clutch Circuit Preformance or Stuck Off what does this code mean and how do i fix it? i have a 2005 toyota corolla se.

Code P0741 is a diagnostic trouble code (DTC) that indicates a problem with the torque converter clutch (TCC) circuit in a vehicle's automatic transmission system. The TCC is a hydraulic clutch that allows the engine to continue running while the vehicle is stopped, and it also helps to improve fuel efficiency when driving at highway speeds.
There are several potential causes for a P0741 code, including:

• Failed torque converter clutch solenoid
• Wiring issues, such as damaged or corroded wires
• Failed torque converter clutch
• Failed transmission control module (TCM)

To fix a P0741 code, it will be necessary to diagnose the specific cause of the problem and then perform the appropriate repair. This will typically require the expertise of a trained mechanic, as working on a vehicle's transmission system can be complex and requires specialized tools and knowledge.
If you are experiencing a P0741 code on your vehicle and are unsure how to proceed, it is recommended to take your vehicle to a mechanic or dealership for diagnosis and repair. They will be able to identify the specific cause of the problem and provide the necessary repairs to fix the issue.

That is a Torque Converter Clutch code it is reading that the circuit performance is stuck off. try these solutions one at a time. 1. check transmission fluid level. 2. add lucus trans treatment. 3. replace sensor. 4 replace torque Converter. Erase code after each action.

Google the code
OBD PO741- should be a Torque Converter Solenoid
acting up or stuck off
I think that will be a fun job to get the cover off the trans
to replace.
Try & find the best trans shop around
Local family business,not a franchise

Possible causes - Low transmission fluid level
- Dirty transmission fluid
- Faulty torque converter clutch solenoid valve
- Torque converter clutch solenoid valve harness or connectors
- Torque converter clutch solenoid valve circuit is open or shorted
- Transmission internal mechanical problem

P0741 deals with internal transmission torque converter slip. A proper scan tool that is capable of reading the sensor's data inside the transmission would show the slipping torque converter and the fluid temperature.
It is critical to know exactly what conditions are present when the code stores. If the codes were not erased, they could be old codes in it's history.
Go back to the transmission shop or where you had the work done on replacing the TCC solenoid and have them read and clear the codes history. As mentioned, they could be old codes that is being read prior to your repairs.
Thank you for using Fixya and good luck, Have a shop verify line pressure, and provided no valves in the TCC hydraulic circuit are worn, replace the torque converter. Also, Lubegard Shudder Fix will at least fix this for awhile. Or try a transmission flush by a shop that uses BG brand products.

P0741 Torque Converter Clutch Circuit Performance or Stuck Off they should fix all of the problems

P0741 means Torque Converter Clutch Circuit Performance or Stuck Off.

Please drive to a garage for help.

Audi code P0741 Torque Converter Clutch Circuit Performance or Stuck Off, THIS IS IN MOST CASES A STUCK TORQUE CONVERTER LOCK UP CLUTCH, U MAY NOT EVEN NOTICE THIS AS ALL GEARS WILL WORK JUST NO TORQUE CONVERTER LOCK UP, U WILL NEED TO VERIFY THE TORQUE CONVERTER CLUTCH CIRCUIT IS OK AND IF SO REPLACE THE TRANSMISSION TORQUE CONVERTER.

Your torque converter is not locking up.
The solution is to have the torque converter replaced and the transmission serviced.
Hopefully, you are still under warranty and can get it repaired it for free.
If not, it can get pretty expensive.

code PO 741 torque converter clutch,circuit performance problem or stuck in Off position