My truck will start fine but then just stall. If you rev it up a bit it keeps running and will drive fine for a while then just quit when you come to a stop . It will start again each time.The problem is intermitant but more frequent before completely warmed up.
I have changed the plugs wires cap and rotor. No change.
Kevin
I had the same problem with my 98 ram it was the throttle position sensor. $20 to $40 part depending on the place. its on the drivers side of the throttle body two little tork screws and its off. changing this not only fixed my stalling but also made my ****** shift alot better it would heisitat shifting from 1st to 2nd but not anymore it shifts perfect now.
Sounds like your iac valve this is on the throttle body and controls idle
314 views
Usually answered in minutes!
×