20 Most Recent 1992 Chrysler Town & Country - Page 7 Questions & Answers

check the wiring at the top of your tail gate may have a break in it.

You wont find it here

I'm leaning more toward you feul pump and filter my friend, a 2000 town and country? Filter is underneth the drivers side and the pump is in the feul tank

depending on how loud it is. it could b a thrown rod. or a lift.

Chilton or Haynes manual. and its not easy to say the least

EASY ACCESS, REMOVE FRONT BUMPER SKIN FOR BOTTOM 2 BOLTS, AND THERE IS 1 ON TOP ,THAT YOU CAN SEE

NO CRANK SIGNAL AT PCM

CHANGE KEY CYLINDER FIRST

GOT A BAD ONE CHANGE AGAIN

CHANGE IT

TUNE UP

WHEN BRAKING WARPED ROTORS ARE FRONT SHIMMY, ON SMOOTH ROAD IN NEUTRAL WHEEL BALANCE, WHEN IN GEAR ACCELERATING FUEL/TUNE UP , SLOWING DOWN TRANSMISSION DECEL DOWNSHIFT. MAKE SURE MUFFLER SYSTEM IS FIRMLY ATTACHED, NOTHING LOOSE AFTER ENGINE IS COOL

WHAT YEAR CAR ? TRANSPONDER NEED COMPUTER, OLD KEY STYLE REPLACE CYLINDER, TRY GRABBING WHEEL AND TURN WHILE TURNING KEY,MIGHT RELEASE LOCK ON CYLINDER

REAR TONE WHEEL HAS SENSOR

ON ENGINE BLOCK

AAUTO ZONE WILL SCAN CAR TELL YOU FOR FREE!!

POWER PACK NEAR BATTERY HAS ALL THE RELAYS, SWITCH OUT A WORKING ONE INTO SIGNAL RELAY AND SEE IF THAT WORKS, IF IT DOES THEN YOU HAVE A BAD RELAY AND REPLACE

Click on the link. Click on wiring diagrams, follow the links, year--make--model, all that good stuff. Every time I post a wiring diagram, it gets deleted. I guess the site is worried about copy-write material, even though it is all over the web. http://bbbind.com/free_tsb.html

on what post your question on youtube but make and model it is there if you post your question right ,good luck

it,s located in the fuse panel refer to your owners manual