20 Most Recent
Polaris 2012 Ranger RZR 800 Questions & Answers
How do I remove prop shaft
Front prop shaft..
up front near the diff, there is a roll pin that goes through the input shaft to the front diff.. drive that out, then unbolt the four bolts on the bottom of the diff so you can move it forward.
work it forward and get the u-joint off of the diff's input shaft.. when you get that free and out of the way, gently tap on the rear of the shaft to work it off of the transfer case's output shaft.
hows that.. :)
2001 500 HO is stuck in High Forward gear
If the shocks are worn out, get off the machine and lift up on the back rack. This takes up the slop between the shifter box and the transmission, and usually allows me to shift. I also had an issue with the thin steel plate behind the shifter box. Got a crack in the top , so it was flexing, creating more slop. Welded it shut, good as new.
3/17/2015 12:50:04 AM •
Polaris ATVs
•
Answered
on Mar 17, 2015
Exhaust
what?? it just bolts on??
6/22/2014 9:11:43 PM •
Polaris ATVs
•
Answered
on Jun 22, 2014
Not finding what you are looking for?