Super Computers & Internet - Recent Questions, Troubleshooting & Support
Super Sonic no signal no channels ?
To resolve "no signal, no channels" on your Super Sonic TV, check your antenna/cable connection, perform a channel scan, and ensure your source/input is set correctly.
When I turn my Smith Corona super correct electric it makes a ticking belt, grinding, kind of a noice
It sounds like there may be an issue with the belt or the motor in your Smith Corona super-correct electric typewriter. The ticking and grinding noise could indicate that the belt is slipping or that there is an issue with the motor. It's possible that the belt may have come loose or slipped out of place during use, causing the ticking noise and the typing issues you're experiencing.
To troubleshoot the issue, you could try removing the casing of the typewriter and inspecting the belt to see if it's in place and properly tensioned. You could also try cleaning the mechanisms inside the typewriter to see if that helps. If you're not comfortable doing this yourself, you may want to take the typewriter to a professional for repair.
In any case, it's important to be careful when working with electrical equipment. Always make sure the typewriter is unplugged and the power cord is disconnected before attempting any repairs or maintenance.
I assembled the super shooter but i am unsure how to fill tube, is there a video on use of shooter?
I'm not able to find a good video but perhaps these steps will work.
To fill the tube with cookie mix, follow these steps:
- Begin by preparing the cookie mix according to the recipe you are using.
- Once the cookie mix is ready, place it in a bowl or container that is easy to scoop from.
- Load the cookie mix into the Super Shooter by scooping it into the tube with a spoon or spatula. You may need to use a small, narrow object such as a chopstick or a toothpick to push the mix down into the tube.
- Continue filling the tube until it is approximately three-quarters full. Be careful not to overfill the tube, as this can make it difficult to use.
- Once the tube is filled, replace the plunger and tighten the cap to seal the tube.
Ji have a super sonic sc-1022KB 10.1 " tablet with Windows OS 16 GB thank you
Pressing the reset button has reset it.
You must now factory reset it. Make sure you have internet access and router codes etc.
- Start by switching off the device by pressing Power button.
- Press and hold Volume Up + Power key for a couple of seconds.
- You can release held keys when you see an Android Logo on the screen.
- To enter the Recovery Mode hold down the Power button for a short while.
- Afterwards from the menu choose "Wipe Data/Factory Reset" by using Volume buttons to scroll and Power button to select options.
- Tap "yes" to confirm if you are 100% sure you want to clear all your data.
- Press Power button to enter option "reboot system now".
This tablet is Android, not Windows.
Not finding what you are looking for?