2003 expedition heat/cool seats not working
All other seat controllers work. Nothing unhooked and fuses are all good.
The diagnostic process for the heating and cooling is a very long and involved process and requires a couple of specialized diagnostic tools that you may not have.
Here are some of the easier things to physically check, which can be preventing the proper function of the seats:
Mechanical
- Climate controlled seat ducts
Electrical
- Climate controlled seat ducts
- Fuse(s)
- Circuitry
- Driver seat module (DSM)
- Lumbar control switch
- Memory set switch
- Power seat motor
- Seat control switch
- Seat fan motor
- Climate controlled seat module
- Climate controlled seat switch
John Deere 4600 shuts off when put in gear,
If your John Deere 4600 shuts off when put in gear, even after bypassing the seat switch, there could be several potential causes for this issue. Here are some troubleshooting steps you can take:
- Check the Neutral Start Switch: The neutral start switch ensures that the tractor can only be started when it is in neutral. If this switch is malfunctioning, it may cause the engine to shut off when you engage a gear. Inspect the switch for any visible issues and consider testing or replacing it.
- Inspect the PTO Switch: The power take-off (PTO) switch should be disengaged when shifting gears. A malfunctioning PTO switch could be causing the engine to shut down. Check the PTO switch for proper operation.
- Examine Safety Interlock Switches: There are often multiple safety interlock switches on a tractor, including those associated with the brake, clutch, and other safety features. Check all safety interlock switches to ensure they are functioning correctly. A faulty safety switch could shut down the engine when a gear is engaged.
- Battery Voltage and Connections: Low battery voltage or poor connections could lead to electrical issues. Check the battery voltage and ensure that the connections are clean and tight.
- Inspect Fuses: Check the fuse box for any blown fuses. If a critical fuse is blown, it could lead to a shutdown when engaging gears.
- Fuel System: Ensure that the fuel system is functioning properly. Check the fuel filter, fuel lines, and fuel supply to the engine. Lack of fuel flow could result in the engine shutting down.
- Engine Sensors: Modern tractors are equipped with various sensors that contribute to engine control. A malfunctioning sensor, such as a crankshaft position sensor, could cause the engine to shut off unexpectedly.
- Professional Inspection: If the issue persists after checking the above components, it may be advisable to seek professional assistance. A qualified mechanic or John Deere service technician can perform more in-depth diagnostics using specialized tools.
It's important to approach these troubleshooting steps carefully, and if you're uncertain or uncomfortable performing certain tasks, seek assistance from a professional. Additionally, refer to the tractor's manual for specific details about the safety interlock system and troubleshooting procedures.
How do you remove the seat on a Galxy excel 2 Mobility Scooter?
Typically, removing the seat on mobility scooters involves releasing a latch or lever, but the process can vary between models. I recommend checking the user manual for your specific scooter or contacting the manufacturer or a local dealer for guidance on how to remove the seat safely. They should be able to provide you with the correct steps for your scooter model.
2003 Lincoln Navigator. Heated seats.
Posting an answer as a follow-up doesn't work on Fixya because posts are not threaded by User. This question has no context to any previous questions and answers.The correct way is to click COMMENT under the answer of the person you wish to reply to, in this case our Expert, Steve Pack.HOWEVER. I looked at your posting history and I don't see any replies to you from Steve!! There are two possible reasons!. You posted Anonymously, in which case it doesn't show on my history. It will show on yours though. Go to that question and reply.2. You read a SUGGESTED Answer where someone else asked a similar question and Steve replied.One major benefit of doing it the right way is that Steve would get a Notification that someone had replied and needed further help. Doing it your way, it would be pure luck if he saw it. I came across a post made in a similar way referring to me by name and it was made over a year previously!!https://www.fixya.com/users/james-i-yorkIn your questions you had contact with our Expert Jeff Armer. He is a full time master auto electrician and the best one to reply to by clicking Comment under his Answer. He is a great guy and I noticed you didn't thank him :>(..
03 Navigator Heated Seats
if you have seats take one old one out and try the replacement. It should be the exact seat old minus heating pad replacement has heating pad.
Not finding what you are looking for?