Panasonic Microwave Ovens - Page 3 - Recent Questions, Troubleshooting & Support

I found a manual for the Panasonic Dimension4 NN-C988W convection microwave at ManualsLib: https://www.manualslib.com/manual/652153/Panasonic-Dimension4-Nn-C988w.html . I hope this helps. Cindy Wells

https://www.youtube.com/watch?v=xne8GQ1n5Yw

dont ever in future buy a microwave with a painted interior as it will always peel.......better to buy a stainless steel one.i don't know if there is a special paint you can buy but if you look on the internet you will find one.

Does Panasonic microwave NN-T945SF has child safety lock

If there is a fault it will be displayed. If the mains fuse has failrd you will get nothing. The most common fault code is H8 which means failed magnetron or supply.

remove it and go hardware store

Overheating. I wonder if it has an internal cooling fan that has failed? It is dangerous inside the case so have it professionally serviced.

Strange, but it is drawing an extra 5 watts and it is electronically controlled. My guess is that you need a 30 watt bulb.

check with an electronics store

CALL A LOCAL REPAIR SERVICE .

N-5552 does not exist but NN-5552 does.
There is a label on the back of the microwave that states the power output.
I have had a look on the web but cannot find the information you require, sorry.

Press the start button (or may be stop/cancel) for more than three seconds.The child lock is on.

hi Peggi and john, have a look here for repairs and new in Dallas TX area:

http://www.superpages.com/bp/Dallas-TX/Affordable-Appliance-Repair-L2069127442.htm?SRC=portals&C=Range+%26+Oven+Sales+%26+Service&lbp=1



regards from the UK :)

Demonstration Mode This is to enable you to experiment setting various programs. (The letter D will always appear in the display window. This is to confirm that there is no microwave power produced and it is safe to use the oven without any food). To set Demonstration Mode: press micro power once, then press Stop/Cancel 4 times. To cancel Demonstration Mode press Micro power once, then press Stop/Cancel 4 times.

You have to take off the case. Need a T20 Tamper Torx bit and a Phillips #2 Bit. There are 2 tamper-torx screws on the case to discourage inquisitive types / prevent untrained hands from entering. Once the screws are out (5 in total), slide the cover off the back. On the right-hand side, you will see the electrics. The bulb is behind the black oval shaped fitting that lies just behind the 2 big red wires that carry the high voltage to the microwave tube. Just pry over the bend-down metal tab, and lift off the black oval, bulb is attached to it. Replace, re-install, and test with case off and door open to ensure your replacement works. Re-install the slip-off case and screws. You're done.
Kermit

Gas oven broken completely. Now need to use all facilities of Panasonic Microwave NN-GD546W. Front indicates it can toast, combination, autocook. Never found user manual, had to just use as basic microwave. Ready and NEED to use all functions no other alternative. Please give guidance to download the Manual of the PANASONIC NN-GD546W margaret G

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

If that doesn't work, leave it unplugged for maybe an hour. Then let us know if the hard reset does not fix it.

You may instead have a failed keypad.

If you (or someone you know) might want to replace it yourself, I have uploaded a handy guide with pictures showing you what's typically involved.

If you would like to have us do this for you, we do that for $39.95 plus part costs, which depends on the exact model, one of these:

NNS688BA NNS688BAS NNS688LA NNS688LAS NNS688WA NNS688WAS

Please feel free to contact me directly if you need more help.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

See if this describes what's happening:

• Put in time, push start and unit runs for 2 seconds, relay clicks, unit goes off. Cook time on display goes off and clock time comes back. Bad upper interlock switch and charred connector.

If so, see http://www.microwavedisplay.com/safety.txt , http://www.microwavedisplay.com/disassembly.txt and http://www.microwavedisplay.com/doorsw.txt

Otherwise, if the digital programmer circuit / controller does not get a feedback signal from the inverter for a period of 3 seconds, the controller will stop the cook cycle.

That may be a loose connection in the wiring between the inverter, magnetron, and/or control board, or maybe one of those components has failed.

Due to the lethal voltages used and produced in inverters, I do not recommend that an inexperienced person work on these.

You can find many Panasonic owner's manuals for free download here.

You can find an authorized Panasonic servicer here.

In Canada, you can find an authorized Panasonic servicer here.

If you're not in the US, see Panasonic.net.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Go to the panasonic web site to download an instruction manual.

Don't order a new button. Here's what I did. I have had many issues with my Panasonic microwave ovens - the button more than once. I even ordered two new buttons from a reliable source and one of the boxes had the wrong button inside. Today, instead of ordering ANOTHER button, I fixed it simply with a bolt and washer. Precisely: the button is built with two hooks, two prongs, and a central "tube". I used a #10 phillips head machine screw (bolt) 1/2" - 3/4" long and a #8 washer (plus Loctite: optional). You need to open the washer's hole slightly to fit over the #10 bolt. Then simply put the button and spring on the bezel and install the bolt from the rear. The washer will trap the bolt in the bezel, but pass through the frame to operate the latch.